Teslacigs Punk II 220 W box mod
Teslacigs Punk II 220 W box mod
The Tesla Punk II 220 W follows on from the Punk 86 W mod. It features the same industrial motifs that give this box its character.
The frame is carved out of the mass for greater robustness. The buttons have been carefully finished to make them easier to grip.
On/Off button at the top of the box
On the surface, there's a 510 connector that's wide enough to accommodate clearomizers or atomizers up to 25 mm. An ON/OFF button turns your device on with a simple gesture.
Battery cover under the box
A hinged opening system at the bottom of the box makes it easy to insert the 2 18650 batteries for maximum power of 220 W. A simple, high-quality mechanism cut directly from the metal. The advantage is that there are no clips to break during use.
USB C charging socket
There's a USB-C charging socket on the front panel for occasional charging of your replacement batteries.
Large screen powered by the Hyber chipset
The front panel features a switch, 2 adjustment buttons and a large screen for viewing all the vape settings.
The Hyber chipset offers several different operating modes:
You can also select other modes: "Soft", "Normal" or "Hard" for more or less reactive power adapted to your coil.
The screen is fully customisable: colour, puff count reset. The charge of the batteries is unique, so the charge indicator will only show one charge bar, which corresponds to the average charge of your two batteries.
Teslacigs Punk II 220W complete Box Mod Kit
Sold without 18650 battery.
Calumette's review: A neat box that will suit regular vapers in particular. The automatic mode is a real plus, especially when used with an atomizer. It avoids a lot of setting errors.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching on/off :
Toggle the ignition switch to the "on" or "off" side to switch your device on or off. You can also make 5 consecutive presses on the swich to switch off the device without using the button.
- Recharging:
Plug the USB C cable into your computer's USB port or wall socket. Your battery has a charge indicator.
-Adjusting the power :
Use the "+" and "-" buttons to change the power of your box.
- Setting operating modes:
To change the operating mode of your box, press the switch twice. To access your box settings, press the swich 3 times.
We advise you to use only quality 18650 batteries that have no defects.