Innokin Endura Apex kit
Innokin Endura Apex kit
Following on from the success of the Endura T20 S kit, Innokin has returned to the tube format with the Endura Apex kit. With a diameter of 22 mm, it's still relatively small and easy to transport. The ignition switch at the top of the battery makes vaping intuitive and easy to handle.
Charging socket under the battery
The tube has a built-in 1800 mAh battery that can be recharged via a USB-C port for all-day vape. A control dial lets you select low or high power to suit your needs.
Innokin Endura Apex battery and clearomizer
The Prism Apex 3 ml clearomizer is also a derivative of the Prism T20 S clearomizer. It is filled from the top by unscrewing the top cap. The 510 drip tip is removable and can be replaced if necessary.
Top cap unscrewed and access to the filling slot
The Apex clearomizer has an airflow that regulates the airflow. The airflow remains relatively tight and is perfectly suited to beginners.
Innokin Prism S coil.
Once the airflow ring has been removed, the Prism S 0.90 ohm coil is revealed, a new variant. This coil is made of Mesh and reproduces the flavours as closely as possible. Of course, you can also use the existing 0.8 and 1.5 ohm Prism S coils.
Innokin Endura Apex complete kit
Calumette's review: A tubular format, easy to use with very good autonomy. The Endura Apex is an excellent compromise between a pod and larger equipment, making it an excellent vape tool for beginners.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
Perform 3 consecutive presses on the swich.
Plug the USB C cable into your computer's USB port or wall socket. Plug in your Endura battery. The LED flashes during charging and goes out once the battery is charged.
Charging indicator :
- Changing the power of your battery :
To change the power of your battery (High or Low), turn the adjustment ring at the bottom of your battery. The red light indicates high power and the green light indicates low power.
- Filling your clearomizer:
Unscrew the top cap and fill the tank by introducing the e-liquid along the inner walls of the clearomizer. Then screw it back on.
- Changing the coil (empty tank):
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the tank base. Remember to change your coils every 10 to 15 fills. Remember that the clearomizer must be empty when you change the coil.
For more information, please refer to the French instructions included in your Innokin Endura Apex kit.