Innokin Prism S coils (5 pack)

Innokin Prism S coils (5 pack)

Coils developed by Innokin for the Innokin T20 S and Endura Apex clearomizers. Designed for maximum vaping, the coils can be used with high nicotine strengths.

Ranges of use :

• Innokin Prism S 1.5 ohm coil with an operating range of 13 W to 14 W for indirect inhalation.
• Innokin Prism S 0.9 ohm coil with an operating range of 14.5 W to 18 W for restrictive direct inhalation.
• Innokin Prism S 0.8 ohm coil with an operating range of 16 W to 18 W for indirect inhalation.

Features :

• Exclusively compatible with the Innokin Prism T20 S clearomizer.
• Organic cotton resistance 0.8 ohm.

Use

- Changing the coil (empty tank):
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before putting the tank base back on. Remember to change your coils every 10 to 15 fills. Remember that the clearomizer must be empty when you change the coil.

Advice

Pour a few drops onto the cotton wool to impregnate your coil. This will prevent a burnt taste.