Innokin Prism Apex clearomizer

Innokin Prism Apex clearomizer

Innokin Prism Apex clearomizer

The Innokin Prism Apex clearomizer is a revised and improved version of the T20 S clearomizer. The design is more modern and the colours more vibrant. The capacity has been increased from 2 to 3 ml.
In this version, Innokin has positioned an airflow at the base of the clearomizer, giving it greater versatility and boosting its efficiency.

Adjustable airflow at the base of the clearomizer

Filling is done from the top by unscrewing the top cap. The 510 drip tip is removable and can be replaced if necessary.

Unscrewed top cap with access to the filling slot

The Apex clearomizer has an airflow that regulates the airflow. The airflow remains relatively tight and is perfectly suited to beginners.

Innokin Prism S coil

Once the airflow ring has been removed, the Prism S 0.90 ohm coil is revealed, a brand new variant. This coil is made of Mesh and reproduces the flavours as closely as possible. Of course, you can also use the existing 0.8 and 1.5 ohm Prism S coils.

Innokin Prism Apex complete kit

Calumette's review: A small clearomizer with a very good capacity of 3 ml and an excellent draw for beginners.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we recommend testing several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Top-fill
• 3 ml capacity
• Adjustable air flow
• Use of Prism S coils

Kit contents

• 1 Innokin Prism Apex clearomizer
• 1 Innokin Prism S 0.8 ohm coil
• 1 Innokin Prism S 0.9 ohm coil
• 1 replacement O-rings kit
• 1 quick start guide

Specifications

• Length: 5.1 cm
• Diameter: 2.2 cm
• Weight : 45 g
• Capacity: 3 ml
• 510 screw thread
• Proprietary drip tip
• Tank in pyrex, metal and plastic
• Compatible with Innokin Prism S coils
• Coils supplied: 1 Innokin Prism S 0.9 ohm coil and 1 0.8 ohm coil.
• Power usage: from 14 to 18 W for the 0.9 ohm coil and from 16 to 18 W for the 0.8 ohm coil.
• Type of inhalation: indirect to direct restrictive
• Type of vapor: tight to airy
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Filling your clearomizer:
Unscrew the top cap and fill the tank by introducing the e-liquid along the inside walls of the clearomizer. Then screw it back on.

- Changing the coil (empty tank):
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the tank base.

Remember to change your coils every 10 to 15 fills. Note that the clearomizer must be empty when changing the coil.

Advice

- We suggest that you place a few drops of e-liquid on the cotton part of your Innokin Prism S coil. Once your Prism Apex clearomizer is full of e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to thoroughly impregnate the liquid in the coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.