Innokin Zenith Nex clearomizer

Innokin Zenith Nex clearomizer

Innokin Zenith Nex clearomizer

Innokin is extending its Zenith range with the Zenith Nex clearomizer, a model with a sleek design, no risk of leakage and great versatility thanks to its wide choice of coils.

With a capacity of 5 ml and a diameter of 26 mm, it guarantees excellent autonomy and can be adapted to a wide selection of boxes.

Teflon lid and adjustable airflow

Entirely designed to prevent leaks, the airflow and filler are located at the top of the Zenith Nex. The airflow is adjustable via a steel ring, allowing you to adjust the draw, more or less airy, depending on the coil installed.

This same ring also gives access to the Teflon cover for filling the tank: when the airflow is opened, the cover is hidden under the ring, further reducing the risk of leaks.

The clearomizer is fitted with a slim drip tip, ideal for MTL (Indirect) draw. A second, wider drip tip is included for RDL (Restrictive Direct) draw.

Innokin Z coil Nex 0.8 ohm coil

To coincide with the launch of the Coolfire Z80 Nex, Innokin is expanding its famous Z Coil range with three new coils in a redesigned design, using Mesh technology for more power and vapor.

The kit comes with 2 coils:

• Z Coil Nex 0.8 ohm coil (pre-installed) with an operating range of between 15 and 18 W for indirect draw.
• Z Coil Nex 0.3 ohm coil with an operating range of between 30 and 40 W for direct draw.

Innokin Zenith Nex complete clearomizer kit

Calumette's review: What can we say about the new Zenith Nex clearomizer? Zero leakage, increased power and even better sensations with the new Z coils... A winning combination for all vaper profiles!

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to try out several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Leak-proof
• 5 ml capacity
• Adjustable airflow
• Use of Innokin Z coils

Kit contents

• 1 Innokin Zenith Nex clearomizer
• 1 Innokin Z coil Nex 0.8 ohm
• 1 Innokin Z coil Nex 0.3 ohm
• 1 replacement O-rings kit
• 1 MTL drip tip
• 1 RDL drip tip
• 1 replacement pyrex
• 1 user manual

Specifications

• Length: 55 cm
• Diameter : 2.6 cm
• Weight : 62 g
• Capacity : 5 ml
• 510 screw thread
• 510 removable drip tip
• Pyrex and metal tank glass
• Compatible with Innokin Z coils
• Coils supplied: 1 Innokin Z coil Nex 0.3 ohm and 0.8 ohm.
• Power consumption: 30 to 40 W for the 0.3 ohm coil and 15 to 18 W for the 0.8 ohm coil.
• Type of inhalation: indirect to direct
• Type of vapor: tight to airy
• vapor: cold to hot
• Percentage of VG in liquid for optimum use: ≥ 50% Vegetable Glycerin
• Level: beginner to regular

Use

- Filling your clearomizer:
Turn the ring on the Top cap. Lift the Teflon cover on the side of the Zenith Nex and fill the cartridge. Close the cover, and turn the ring again to conceal the filler cover.

- Changing the coil :
Position your clearomizer upside down. Unscrew the base of the clearomizer, pull out the coil and insert a new one.

- Adjusting the Airflow :
Turn the adjustment ring at the top of the clearomizer to the right or left depending on the type of vape you're looking for.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. Once your Zenith Nex clearomizer has been filled with e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure the liquid is well impregnated into the coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.