Eleaf IStick Amnis 3 kit

Eleaf Istick Amnis 3 kit

Eleaf Istick Amnis 3

Building on the success of the previous Amnis kits, Eleaf presents the Amnis 3, a clever mix between versions 1 and 2.

Amnis 3 battery and GS Drive clearomizer

The size and shape remain identical. Thin and light, it feels great in the hand. Inside the device, a 900 mAh battery provides reasonable autonomy for occasional use, for a maximum power of 20W.

Charging socket under the battery

The charging socket changes from micro USB to USB C for maximum 1A charging.

Battery set in intermediate position

The front panel features the operating LED and the ignition switch.

3 power levels are available: High, Medium and Low. Adjustment is intuitive, thanks to the knob beneath a small display showing the letters H, M and L.

GS Drive clearomizer

It's fitted with the GS Drive clearomizer, which is perfect for getting started with vaping. Its 2 ml capacity limits the number of times you need to refill it during the day.

Sliding top cap

Filling is done from the top via a sliding top cap, which is fitted with a lock to prevent accidental opening. The airflow is large enough for direct or indirect inhalation, thanks to its adjustable airflow ring.

Adjustable airflow

Compatible with all Eleaf GS air coils. The battery will accept 1.6 ohm, 1.5 ohm, 1.4 ohm and 0.75 ohm coils. However, the 0.35 ohm and 0.15 ohm GS Air coils will not be compatible with the Amnis 3 because they are too powerful for the battery.

GS AIr 0.75 ohm coil

Eleaf GS Air coils power ratings:

• Eleaf GS Air 1.4 ohm coil with an operating range of 6 W to 12 W for indirect draw.
• Eleaf GS Air 0.75 ohm coil with an operating range of 8 W to 25 W for indirect to restrictive direct draw.

Istick Amnis 3 complete kit

Calumette's review: All the benefits of the first 2 Amnis in one. It will suit beginners as well as regular vapers. A quality model at an affordable price.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• 3 power levels
• Excellent grip
• Lightweight
• Ideal for beginners

Kit contents

• 1 Eleaf Istick Amnis 3 battery
• 1 Eleaf GS Drive clearomizer
• 1 Eleaf GS Air 1.4 ohm coil
• 1 Eleaf GS Air 0.75 ohm coil
• 1 USB type C cable
• 1 user manual in French

Specifications

• Length: 12.8 cm
• Width: 1.8 cm
• Depth: 2.6 cm
• Weight : 64 g
• Capacity: 2 ml
• 510 screw thread
• 510 removable plastic drip tip
• Pyrex tank glass
• Compatible with Eleaf GS Air coils
• Wattage: 20 W
• Max charging current: 1 A
• Capacity: 900 mAh
• Coils supplied: Eleaf GS Air 1.4 ohm and GS Air 0.75 ohm
• Power usage: from 6 W to 12 W for the GS Air 1.4 ohm coil, from 8 W to 25 W for the GS Air 0.75 ohm coil.
• Type of inhalation: indirect
• Type of vapor: tight
• vapor: cold to slightly warm
• Percentage of VG in the liquid for optimal use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Recharging:
Plug the USB type C cable into your computer's USB port or wall socket. The LED turns red while charging and goes out once the box is charged.
Charge indicator :

• between 100% and 60%, green LED on
• between 59% and 20%, blue LED on
• Less than 19%, red LED on

- On/off:
Press the swich 5 times in succession.

- Changing power :
When the device is switched on, press the button to select the power level.

- Filling your GS Drive clearomizer:
Press the top cap release button, then at the arrow to slide it out. Let the liquid run down the inside walls and then screw it back on.

- Changing the coil:
Unscrew the base of the tank and the coil. Change the coil and screw back on. Remember to change your coils every 10 to 15 fills.

- Adjusting the airflow :
Turn the airflow ring to adjust the airflow as required. The ring allows you to block the hole through which the air enters the clearomizer to a greater or lesser extent. The more the hole is open, the more the vapor. In short, for a tight draw, leave the air hole almost closed and for a more airy draw, leave the air hole wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Eleaf GS AIr coil. This will prevent a burnt taste.