Eleaf GS Drive clearomizer

Eleaf GS Drive clearomizer

The clearomizer uses the same frame as the Eleaf GS air series, but with some new improvements.

The filling hatch on the GS Drive clearomizer.

Filling is from the top, with a sliding top cap fitted with a lock that prevents accidental opening. The air intake is large enough for both direct and indirect inhalation, thanks to its adjustable air flow ring.

The Eleaf GS Drive clearomizer disassembled.

It is compatible with all Eleaf GS air coils. It has a capacity of 2.0 ml, which means you can use it all day, but when using 0.35 ohm coils you'll need to plan on one or more refills during the day. This model of coil is a little more liquid-intensive.

Power consumption of the Eleaf GS Air coil :

• Eleaf GS Air M 0.35 ohm coil with a range of use from 10 W to 25 W for restrictive direct to direct inhalation.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Top filling
• Top cap locking system
• Suitable for compact boxes and small batteries
• Pure Khantal and cotton coil (no silica fibre) for excellent flavour reproduction.
• Adjustable air flow to control the flow and density of the vapor

Specifications

• Length: 5.8 cm
• Diameter : 1.5 cm
• Weight : 30 g
• Capacity: 1.8 ml
• 510 screw thread
• Proprietary drip tip
• Pyrex tank glass
• Coils supplied: GS AIR pure cotton 0.35 ohm with an operating range of 10 W to 25 W.
• Compatible with coils: Eleaf GS AIR coils (5 pack)
• Inhalation type: indirect to restrictive direct
• vapor type: tight to airy
• vapor: warm
• Percentage of VG in liquid for optimum use: ≤ 50 % Vegetable Glycerin
• Level: beginner

Use

- Filling your GS Drive clearomizer:
Press the release button on the top cap and then at the arrow to slide it out. Fill by introducing the e-liquid along the inner walls of the GS AIR Drive into the notch provided and screw back in.

- Changing the coil :
Unscrew the base of the tank and the coil. Change the coil and screw back on. Remember to change your coils every 10 to 15 fills.

- Adjusting the Air Flow :
Turn the AIRFLOW ring to adjust the air flow as required. The ring allows you to block the hole through which the air enters the clearomizer to a greater or lesser extent. The more the hole is open, the more the vapor. In short, for a tight draw, leave the air hole almost closed and for a more airy draw, leave the air hole wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your coil. Once your clearomizer is full of e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure that the liquid is well impregnated into the coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.