Innokin Zenith Minimal clearomizer

Innokin Zenith Minimal clearomizer

Innokin Zenith Minimal clearomizer

The minimal is a version that can be described as an intermediate before the Zenith. It's smaller than the other versions, with a diameter of just 24 mm and a large capacity of 4 ml of liquid. This gives you plenty of vape time.

Top cap removed

Filling takes place via the top cap, which opens in a quarter-turn to give access to a large opening protected by a Teflon 'drip-proof' cover. Above the top cap is a 510 drip tip. Innokin offers 3 drip tip models supplied with the kit, so you can choose between a more or less airy draw depending on your needs.

Adjustable airflow at the base of the clearomizer

At the base of the clearomizer is an airflow ring that regulates the draw thanks to a wide slot for an airy vape or 3 small holes for a tight vape. You can choose between an indirect or direct resctrictive draw.

Innokin Z coil 0.3 ohm

If you're new to vaping, we recommend using the 1.6 or 1.2 ohm coils, which are better suited to higher nicotine strengths or nicotine salts.
The kit comes with 2 coils:

• Z coil 0.3 ohm: semi-direct airy draw for a range of use between 30 and 40 W (restrictive direct to direct draw).
• Z coil 0.8 ohm: tight draw for a range of use between 15 and 18 W for indirect draw.

Innokin Zenith Minimal complete kit

Calumette's review: A small, simple and effective clearomizer. Perfect for beginners, with a good choice of coils and 3 different drip tips.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we recommend testing several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Top-fill
• 4 ml capacity
• Adjustable airflow
• Use of Innokin Z coils

Kit contents

• 1 Innokin Zenith Minimal clearomizer
• 1 Innokin Z coil 0.8 ohm
• 1 Innokin Z coil 0.3 ohm
• 1 replacement O-rings kit
• 1 MTL drip tip
• 1 RDL drip tip
• 1 replacement pyrex
• 1 quick start guide

Specifications

• Length: 4.6 cm
• Diameter : 2.4 cm
• Weight : 46 g
• Capacity: 4 ml
• 510 screw thread
• 510 drip tip
• Pyrex, metal and plastic tank glass
• Compatible with Innokin Z coils
• Coils supplied: 1 Innokin Z coil 0.3 ohm and 1 Z coil 0.8 ohm.
• Power usage: 30 to 40 W for the 0.3 ohm coil and 15 to 18 W for the 0.8 ohm coil.
• Type of inhalation: indirect to direct restrictive
• Type of vapor: tight to airy
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 60% Vegetable Glycerin
• Level: beginner

Use

- Filling your clearomizer:
Unscrew the top cap by a quarter turn and fill the tank by introducing the e-liquid along the inside walls of the clearomizer. Then screw it back on.

- Changing the coil (empty tank):
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the tank base.

Remember to change your coils every 10 to 15 fills. Note that the clearomizer must be empty when changing the coil.

Advice

- We suggest you place a few drops of e-liquid on the cotton part of your Innokin Z coil. Once your Zenith Minimal clearomizer has been filled with e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure that the liquid is well impregnated into the coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.