Innokin EZ Tube Kit
Innokin EZ Tube Kit
Succeeding the Innokin Zlide Tube kit is no easy task, but the EZ Tube kit rises to the challenge! It's still a tube, but it's less imposing than the previous version. The EZ Tube now features an integrated screen under the battery and a new version of the Zenith.
Battery front panel with operating button
The EZ Tube has a 2100 mAh battery with a maximum power output of 40 W. A button on the front panel switches the battery on. At the rear, a USB C-type socket enables 1.5 A charging.
Display on the underside of the box showing power and battery level
The EZ tube is unusual in that it has a small screen under the battery. It's easy to read, though. A thumbwheel around the screen lets you adjust the wattage from 6 to 40 W, depending on the coil.
Zenith Minimal clearomizer
A Zenith Minimal clearomizer appears at the top. Smaller than the other versions, with a diameter of just 24 mm, it still holds up to 4 mm of liquid. This greatly limits the number of times you need to refill it during the day.
Filler cap under the removable quarter-turn top cap
Filling is via a top cap that opens in a quarter-turn. After unscrewing the top cap a quarter-turn, you have access to a large opening protected by a Teflon anti-drip cover. Above the top cap is a 510 drip tip. Three drip tip models are supplied with the kit, giving you a more or less airy draw depending on your needs.
Dismantled Z coil and 510 drip tip
At the bottom, an airflow ring regulates the draw, revealing a wide slot or three smaller holes for airy to tight vaping. You can therefore have an indirect or direct resctrictive draw.
Once the ring is removed, you can access the Z coil inside the Zenith.
If you're new to vaping, we recommend using the 1.6 or 1.2 ohm resistance, which are better suited to higher strengths of nicotine or nicotine salts. The kit comes with 2 coils:
Range of use of the coils :
Innokin EZ Tube complete kit
Calumette's review: A fairly classic tube format often abandoned by certain brands in favour of pods, but Innokin is continuing to bring the first e-cigarette models to life, while adding a touch of modernity and practicality. It's perfect for beginners, and the screen under the box is a real plus for everyday use. It can operate at up to 40W with 0.3 ohm coils, but given its capacity, we recommend using it at between 10 and 20W to limit the number of times you need to reload during the day.
E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we recommend testing several different liquids, for example at least one Classic flavour and at least one fruity flavour.
Make 3 consecutive presses on the swich.
Plug the USB C cable into your computer's USB port or wall socket. Plug in your EZ Tube battery. The LED will light up red while charging, turn green when charging is complete and go out completely when fully charged.
- Changing the power :
Press the power button twice in less than a second to change the power under the battery. Turn the adjustment ring at the bottom of your battery to set the power from 6 to 40 W.
- Filling your clearomizer:
Unscrew the top cap and fill the tank by introducing the e-liquid along the inside walls of the clearomizer. Then screw it back on.
- Changing the coil (empty tank):
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the tank base. Remember to change your coils every 10 to 15 fills. Remember that the clearomizer must be empty when changing the coil.
For more information, please refer to the French instructions included in your Innokin EZ Tube kit.