Innokin Sceptre 2 Pod kit

Innokin Sceptre 2 Pod kit

Innokin Sceptre 2

Innokin has revisited the Sceptre kit, incorporating changes to the air control and ignition systems to make them more intuitive to use in everyday life.

Front panel ignition button

The design of the Sceptre 2 remains identical to the first version, with only the ignition button, originally located on the side, now on the front panel for easier vaping.

You can choose to vape by pressing the central button or by inhalation for automatic mode.

Side USB-C socket

The integrated 1400 mAh battery is charged via a USB-C socket, which is faster than the previous version.

There are two LEDs on either side of the ignition button: the one on the right indicates the battery charge level and the one on the left, the power level of the device. You can also switch from lower to higher power by pressing the central button twice in less than a second.

Cartridge removed from the pod

Innokin has simplified the operation of its cartridge as much as possible, while ensuring that it holds a generous 3 ml.

Filling lid

The cartridge is filled from the side by lifting the Teflon cover. Once fitted into the battery, the Sceptre 2's frame protects the cartridge and prevents it from opening accidentally.

Adjustable side airflow

The airflow is adjusted using a sliding knob rather than the bottom of the cartridge. The choice is yours: a tighter draw for indirect inhalation or a more airy draw for restrictive direct inhalation. An efficient and practical system for everyday use.

Coil with support

On the underside of the cartridge, 4 magnetised studs hold the unit firmly to the battery. The coil is slightly recessed into the cartridge, making it easy to replace. The Sceptre 2 works with Innokin S coil or Innokin Sceptre coils, so every vaper can find their own type of vape.

Please note: the coil is mounted on an adaptor, so make sure you keep it in a safe place when changing the coil.

2 types of coils are included in the kit:

• Innokin Sceptre 0.6 ohm coil with an operating range of 11 W to 16 W for indirect to restrictive direct inhalation.
• Innokin Sceptre S Coil 0.5 ohm coil with an operating range of 18 W to 20 W for restrictive direct inhalation.

Innokin Sceptre 2 complete Pod kit

Calumette's review: significant improvements that make it easier and more accessible to beginners.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Small size
• Use in MTL or RDL
• Automatic lighting
• 3 ml capacity

Kit contents

• 1 Innokin Sceptre 2 pod
• 1 Innokin Sceptre 0.6 ohm coil
• 1 Innokin Sceptre 0.5 ohm coil
• 1 USB C cable
• 1 quick start user manual in French

Specifications

• Length: 10.4 cm
• Width: 2.8 cm
• Depth: 1.8 cm
• Weight : 96 g
• Capacity: 3 ml
• Removable Sceptre 2 cartridge
• Proprietary drip tip
• PET tank
• Compatible with Innokin Sceptre coils (5 pack)
• Wattage: depends on the coil
• Max charge current: 0.8 A
• 1400 mAh capacity
• Coils supplied: Innokin Sceptre coils 0.6 ohm and 0.5 ohm
• Power usage: 16 W for the 0.6 ohm coil, 20 W with the 0.5 ohm coil
• Inhalation type: indirect to restrictive direct
• Type of vapor: tight
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Switching on/off:
Perform 3 consecutive presses on the swich.

- Recharging:
Plug the USB-C cable into your computer's USB port or wall socket. The LED is red when charging and turns green when the charge is over 90%.

• Green LED: charging between 30% and 100%.
• Blue LED: charging between 10% and 29%.
• Red LED: charging less than 9%.

- Changing the power :
Press the "power" button twice within one second to change the power. The purple LED will light up, indicating that you have switched to high power. If you wish to switch back to low power mode, simply repeat the same procedure, the LED will light up blue.

- Filling the cartridge:
Pull on the cartridge drip to remove it from the pod. Lift the Teflon side cover and fill it. Then put your cartridge back in place.

- Changing the coil :
Pull on the cartridge drip to remove it from the pod, then pull on the coil support. Unscrew the coil and fit a new one. Replace the whole assembly in the cartridge.

- Adjusting the Airflow :
Slide the knob on the cartridge to obtain a more or less airy draw.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Sceptre coil. This will prevent a burnt taste.

- Make sure you respect the maximum use ranges indicated on your coils.