Innokin Zlide Top clearomizer

Innokin Zlide Top clearomizer

Innokin Zlide Top clearomizer

In the same order as the Zenith and Zlide clearomizers, the Zlide Top is the latest from Innokin. Designed for indirect MTL inhalation, it can also be used for direct RDL inhalation, provided the right coil is fitted. Relatively compact, with a diameter of 24 mm, it fits most of the boxes on the market.

Airflow at the top of the clearomizer

Innokin has abandoned the idea of an airflow at the bottom of the clearomizer in favour of one at the top cap. This avoids the risk of condensation or leaks. The airflow slot occupies almost the entire circumference of the clearomizer, making it more precise to use.

Sliding top cap with access to the filler cap

Filling is also done from the top via the sliding top cap, which reveals a slot with a non-drip cover.

The tank holds 3 ml with the straight tank glass and up to 4.5 ml with the bulb tank glass supplied in the kit.

Innokin 0.6 ohm coil

As with all the clearomizers in this range, the Zlide Top is fitted with Innokin Z coil. To mark the launch of the Zlide Top, we're introducing a 0.6 ohm coil featuring Duo Prime technology. The principle is based on 2 Mesh coils that surround the cotton inside and out, resulting in excellent liquid saturation of the coil.

Contrary to what you might think, the 0.6 ohm coil is not used with high wattages, but with a wattage of between 9 and 13 W for an indirect draw.

Choice of coils:

• Z Coil 0.30 ohm is used in a range between 30 W and 40 W for a more powerful, restrictive direct draw.
• Z Coil 0.6 ohm Duo Prime is used in a range between 9 W and 13 W for indirect draw vaping.

Innokin Zlide Top clearomizer kit

Calumette's review: The Zlide Top follows in the footsteps of its predecessors: it's a high-performance, high-quality model. The airflow at the top of the clearomizer makes all the difference, preventing leaks and condensation. The 0.6 ohm duo prime coil literally gives your flavours a boost.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Capacity up to 4.5 ml
• High airflow to limit condensation
• 0.6 ohm coil in Duo Prime technology

Kit contents

• 1 Innokin Zlide Top clearomizer
• 1 Innokin Zenith 0.6 ohm coil
• 1 Innokin Zenith 0.3 ohm coil
• 1 replacement tank glass 4.5 ml
• 1 RDL drip tip
• 1 quick start guide

Specifications

• Length: 5.2 cm
• Diameter: 2.4 cm
• Weight : 65 g
• Capacity: 3 to 4.5 ml
• 510 screw thread
• Drip tip 510
• Pyrex tank glass
• Compatible with Innokin Z coil
• Coils supplied: one 0.6 ohm coil and one 0.3 ohm coil
• Power usage: 13 W for the 0.6 ohm coil and 40 W for the 0.3 ohm coil.
• Inhalation type: indirect to semi-direct
• vapor type: tight to airy
• vapor: cold to warm depending on the coil
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner to regular

Use

- Filling your Clearomizer:
Push the top cap in the direction indicated by the arrow. Pour your liquid into the slot. Close again.

- Changing the coil:
Turn your clearomizer upside down. Unscrew the base of the tank. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer.

- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your coil. Once your Zlide Top clearomizer has been filled with e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure that the liquid is well impregnated into the Z coil. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.