Innokin Cool Fire Z60 - Zlide top kit
Innokin CoolFire Z60 Kit
In its constant quest for innovation, Innokin presents the Cool Fire Z60 kit with a redesigned box and the long-awaited zlide top clearomizer.
The design takes up the rounded shape typical of the range, while slightly accentuating the curve for a visually pleasing result in the hand.
Innokin CoolFire Z60 front panel
Unlike its predecessors, the Innokin CoolFire Z60's battery life has been extended to 2500 mAh for a maximum output of 60 W. Charging is via a USB C plug for fast charging of your battery.
Power button on the underside of the box
An On/Off button on the underside of the box turns your box on and off.
Large colour screen
On the front, you'll find the Z80's large colour screen, as well as the settings and power buttons. The information is perfectly legible and you won't need to take out your glasses to adjust your CoolFire Z60.
The box works in Variable Wattage, a classic of its kind for simple, effective use. Your box also offers a number of features, including REFRESH mode, which extends the life of the coil. The special feature of this function is that 40% of the power is pulsed.
The "Coil+" function allows you to vape at variable wattage, except that after each puff, the box sends an extra burst of power to the coil, attracting the liquid inside the cotton and preserving the flavours.
Innokin Zlide Top clearomizer
The box is fitted with the Innokin Zlide Top clearomizer, a revamped version of the Zlide clearomizer. Designed for indirect inhalation, it can easily be converted to restrictive direct inhalation with an adapted coil.
Airflow at the top of the clearomizer
Innokin has abandoned the idea of an airflow at the bottom of the clearomizer in favour of one at the top cap. This avoids the risk of condensation or leaks. The airflow slot takes up almost a third of the clearomizer's circumference, making it quieter and more precise to use.
Sliding top cap with access to the filler cap
Filling is also done from the top via the sliding top cap, which reveals a slot with a non-drip cover.
The tank holds 3 ml with the straight tank glass and up to 4.5 ml with the bulb tank glass supplied in the kit.
Innokin 0.3 ohm coil
As with all the clearomizers in this range, the Zlide Top is fitted with Innokin Z coils. To coincide with the launch of the Coolfire Z60, Innokin is launching a 0.6 ohm coil featuring Duo Prime technology. The principle is based on 2 Mesh coils that surround the cotton inside and out, resulting in excellent liquid saturation of the coil.
Contrary to what you might think, the 0.6 ohm coil is not used with high wattages, but with a wattage of between 9 and 13 W for an indirect draw.
Coils power ratings :
Innokin CoolFire Z60 complete kit
Calumette's review: As always, Innokin is not content with a simple evolution of its kit, but offers a real transformation to make everyday use even easier, with the end user in mind.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching on/off:
Place the switch on the underside of the box in the "on" or "off" position.
Plug the USB C cable into your computer's USB port or wall socket. Plug in your Innokin Cool fire Z60. The state of charge of your battery is displayed at the top right of the screen.
Switch on your box. Select the operating mode by pressing the "+" and "-" buttons to access the menu. To adapt the power of your box, hold down the + or - button for several seconds to unlock the power setting. Confirm by pressing "power".
- Putting your box to sleep:
Press the "power" button 3 times to put your box to sleep.
- Filling your Clearomizer :
Push the top cap in the direction indicated by the arrow. Pour your liquid into the slot. Close again.
- Changing the coil :
Turn your clearomizer upside down. Unscrew the base of the tank. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer.
- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.
- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. This will prevent a burnt taste.
- Be sure to respect the maximum usage ranges indicated on your coils.