Voopoo Drag Q kit

Voopoo Drag Q kit

Voopoo Drag Q Pod

Voopoo presents a small kit for beginners, well thought out and very efficient to use. It follows the lines of the Drag range while retaining its rounded shape. The back of the device is covered in imitation leather, providing an excellent grip for unrivalled comfort when vaping.

USB C charging socket under the box

The small box still packs a 1250 mAh battery for a maximum power of 25 W, which is far from negligible. Charging is handled by a USB C charging socket on the underside of the box.

The LED indicates when the device is working, as well as the power output according to the opening of the airflow.

On the front of the box, a power button and a large LED cover almost the entire height of the box to indicate the charge level and that the box is switched on. There are 2 ways of vaping: either by pressing the button or automatically by inhaling directly onto your pod.

Front of the Pod Drag Q

The ignition button deactivates automatically after 5 minutes. To reactivate it, switch to automatic mode or press the "power" button 3 times.

Adjustable airflow with automatic power management

Voopoo offers simultaneous management of airflow and operating power to make the pod easier to use. The airflow can be adjusted via a large thumbwheel to switch from a very tight draw to a slightly airy one. The knob will also automatically adjust the power of the device according to the coil installed and the airflow selected.

You no longer run the risk of having a vapor that's too hot or burning your lips, because the battery takes care of everything. This function is deactivated by turning the ring and pressing the "power" button at the same time.

Removed cartridge

The top section houses the ITO-X cartridge for indirect firing. Made from steel and PCTG, it is drop and heat resistant. The long, narrow proprietary drip provides excellent MTL inhalation.

The top of the cartridge can be removed for access to the filler hole.

The top cap can be unscrewed to access the Teflon drip-proof filling port. The cartridge is held in the pod by spring-mounted balls, which prevent the cartridge from detaching from the battery in the event of a fall. Unlike the magnet system, this will require a little more energy to remove the cartridge from the pod.

Location of the ITO coil under the cartridge

Voopoo ITO coils are inserted from the bottom of the cartridge. You can choose between 4 types of coils: 2 designed for beginners and high nicotine strengths (1.2 and 1 ohm) and 2 more powerful coils for a slightly airier vape (0.5 and 0.7 ohm).

ITO M3 coil, 1.2 ohm

Your kit includes 2 Voopoo ITO coils with the following wattages:

• Voopoo ITO M0 0.5 ohm coil for a range of use between 18 and 25 W for indirect or restrictive direct draw.
• Voopoo ITO M3 1.2 ohm coil for a range of use between 8 and 12 W for indirect draw.

Voopoo Drag Q complete pod kit

Calumette's review: A small size that's much more affordable than the rest of the Voopoo Drag range. The Drag Q is perfect for beginners looking for simple, effective equipment.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic or button ignition
• Automatic adjustment of power and airflow

Kit contents

• 1 Voopoo Drag Q pod
• 1 ITO X cartridge
• 1 Voopoo ITO M0 0.5 ohm coil
• 1 Voopoo ITO M3 1.2 ohm coil
• 1 USB-C cable
• 1 user manual

Specifications

• Length: 11.8 cm
• Width: 2.3 cm
• Depth: 3.2 cm
• Weight : 102 g
• Capacity: 3.5 ml
• Clip-on with spring-mounted balls
• Proprietary plastic drip tip
• PCTG tank
• Compatible with Voopoo ITO coils
• Power: 18 W
• Max charge current: 2 A
• Capacity: 1250 mAh
• Coils supplied: Voopoo ITO M0 0.5 ohm, and ITO M3 1.2 ohm
• Power usage: 12 W with the 1.20 ohm coil, 25 W with the 0.5 ohm coil
• Type of inhalation: indirect
• vapor type: tight
• vapor: cold
• Percentage of VG in liquid for optimum use: ≤ 60% Vegetable Glycerin
• Level: beginner

Use

- Switching on/off your Voopoo Drag Q pod:
Perform 5 consecutive presses on the swich.

- Recharging your Voopoo Drag Q pod:
Plug the USB-C cable into your computer's USB port or wall socket.

Charge indicator after each puff :

• Green LED: charging between 60% and 100%.
• Blue LED: charging between 30% and 59%
• Red LED: charging less than 29%

-Adjusting power :
The airflow setting automatically adjusts the wattage. The more the airflow is open, the higher the power. You can lock the power of your device by pressing the "power" button and turning the control wheel at the same time.

- Locking your pod:
The power button locks automatically with no activity after 5 minutes. To reactivate it, either aspire on your pod or press the power button 3 times in less than a second.

- Filling your cartridge:
Turn the top cap a quarter turn and introduce the e-liquid through the filling hole provided. Then close the top cap.

- Changing the coil :
Pull on the cartridge drip to remove it from the pod. Then remove the coil and fit the new one. Put your cartridge back in place.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Voopoo ITO coil. This will prevent a burnt taste.