Innokin GoZ+ clearomizer

Innokin Go Z+ clearomizer

Innokin presents the Goz+ clearomizer, a coloured model made from food-grade PCTG that's lightweight and shock-resistant. In this improved version of the Goz, the diameter is increased from 20 mm to 24 mm and the capacity is increased from 2 ml to 3.5 ml, increasing your vape autonomy.

Filling via sliding top cap

The liquid is introduced by sliding the top cap. The filling slot is fitted with an anti-drip system to prevent any spillage. The whole unit fits snugly and there's no play when in use. The 510 drip tip combined with the Goz+ is ideal for MTL vaping.

Adjustable airflow Innokin Go Z+ clearomizer

The airflow has been specially designed for a tight draw for indirect inhalation vaping. Adjustment is child's play.

Clearomizer disassembled with Innokin Z coil 0.8 ohm coil.

The Goz+ uses Innokin Z coils, which have already proved their worth on Zenith and Zlide clearomizers. These coils have the art and manner to sublimate all your flavours.

Your kit comes with :

• Z Coil 0.8 ohm can be used in a range between 15 W and 18 W for a restrictive indirect or direct draw.

Innokin Go Z+ clearomizer

Calumette's review: this version has a double advantage: in terms of autonomy and compatibility with larger boxes.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• PCTG tank
• Top filling
• Sliding top cap
• 3.5 ml capacity

Kit contents

• 1 Innokin Go Z+ clearomizer
• 1 Innokin Z Coil 0.8 ohm
• 1 quick start guide

Specifications

• Length: 4.5 cm
• Diameter : 2.4 cm
• Weight : 33 g
• Capacity: 3.5 ml
• 510 screw thread
• Proprietary drip tip
• PCTG tank
• Compatible with Innokin Z coil
• Coils supplied: 1 Z coil 0.8 ohm
• Power usage: 18 W for the 1.6 ohm coil
• Inhalation type: indirect
• vapor type: tight
• vapor: cold
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Filling your clearomizer:
Slide off the top cap and fill the tank by introducing the e-liquid along the inner walls. Then close.

- Changing the coil:
Unscrew the base of the tank and pull out the coil. The coil is not screwed on but clipped onto the clearomizer. Remember to change your coils every 10 to 15 fills. The clearomizer must be empty when changing the coil.

- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. Once you've filled your Go Z+ clearomizer with e-liquid, remember to inhale (without activating the battery), plugging all the holes in your clearomizer so that the liquid is well impregnated into the coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.