Innokin Gozee kit
Innokin Gozee kit
The Innokin Gozee kit is a colourful little capsule full of good humour. It consists of a small box combined with the Innokin GO Z + clearomizer. It's perfect for beginners.
Innokin Gozee battery front panel
Thanks to its polycarbonate and ABS structure, the box is shock-resistant. It's rigid but also ultra-light. The ergonomics are well thought out, even for small hands.
USB C-type charging socket
With a capacity of 2100 mAh and 60 W, the box offers great autonomy and performance. Fast charging is via a USB C socket that can accept 2A of charge.
Large, clear and legible colour screen
The front panel features a large colour screen for viewing your various vape parameters (charge level, wattage, ohm value, etc.). To simplify use, the box only operates in Variable Wattage mode. You can adjust the wattage according to the chosen coil by pressing and holding the "+" or "-" button. This prevents unwanted adjustments. Once set, you can also lock the adjustment buttons.
Innokin GO Z+ clearomizer
At the top is the Innokin GO Z + clearomizer, an improved version of the GO Z with a 3.5 ml capacity. Made entirely from PTCG, it's also very light and shock-resistant.
Sliding filler door
The liquid is introduced by sliding the top cap. The filling slot is fitted with a drip-stop system to prevent spillage. The 510 drip tip combined with the Goz+ is ideal for MTL draws. A second drip tip is supplied for direct restrictive vaping (RDL).
Airflow for MTL or RDL draw
You can switch from an airy to a tight vape by adjusting the airflow ring on the wide slot or on the holes of different diameters.
Once the base of the clearomizer is removed, you have access to the pre-mounted 0.8 ohm Z coil designed for a fairly tight draw. A second 0.3 ohm coil is available for a more airy draw. The range of Innokin Z coils is compatible with the Goz+.
Innokin Z coil 0.8 ohm
Power ratings of the coils :
The 1.6 ohm coil is recommended for high nicotine strengths and nicotine salts.
Innokin Gozee complete kit
Calumette's review: Colourful, ultra-light and extremely easy to use, this kit has everything you need to get off to a good start with vaping. It's also ideal for vapers looking for a little extra equipment.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching your Gozee battery on and off:
Perform 3 consecutive presses on the swich.
- Recharging your battery:
Plug the USB Type C cable into your computer's USB port or wall socket.
- Resetting your puff counter:
To access the puff counter, please press the "+" button and the "power" button. You can reset your puff counter to 0 by selecting "clear".
- Locking the "+" and "-" buttons:
To lock the "+" and "-" buttons, and avoid any adjustment incidents during transport, press the "-" button and the "power" button. A red or green padlock logo will indicate that the buttons are locked.
- Adjusting the power of your battery :
Press the "+" or "-" button for a few seconds for the power to flash, so you can adjust the power of your device according to the coil installed.
- Filling your clearomizer:
Slide back the top cap and fill by introducing the e-liquid along the inside walls of the clearomizer. Then close.
- Changing the coil :
Unscrew the base of the tank and pull on the coil. The coil is not screwed on but clipped onto the clearomizer. Remember to change your coils every 10 to 15 fills. The clearomizer must be empty when changing the coil.
- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.
For more information, please refer to the French instructions included in your Innokin Gozee kit.