Vaporesso GTX GO 80 kit

Vaporesso GTX GO 80 kit

Vaporesso GTX Go 80 Kit

The GTX Go 80 is a tube-sized kit with a large battery capacity aimed at vapers used to direct inhalation vaping. The design is minimalist yet modern. Unlike the GTX Go 40, the GTX Go 80 is more powerful and offers greater capacity. There's no need to adjust the battery; it adjusts automatically according to the coil installed in the cartridge.

USB Type C socket

With its 3000 mAh capacity and 80 W of power, you'll have all the autonomy you need for everyday vaping. A USB C socket on the tube allows you to charge your equipment more quickly.

Vaporesso GTX Pod 26 mm cartridge

The battery is linked to a magnetic cartridge with a capacity of 5 ml and a diameter of 26 mm. The removable top cap can be taken off with a simple quarter-turn and gives access to a non-drip filler hole that is very practical for everyday use. The drip tip cannot be removed. Suitable for airy draw.

Removable Top Cap

The GTX coil is inserted from the bottom of the cartridge into the hole provided. The airflow at the bottom of the cartridge is adjusted by turning the cartridge in the battery. The airflow control allows a more or less airy draft.

The kit is compatible with Vaporesso GTX coils, renowned for their responsiveness and excellent flavour reproduction.
Range of use :

• GTX coil 0.2 ohm for a range of use between 45 and 60 W: direct draw.

Vaporesso GTX Go 80 complete kit

Calumette's review: An upgraded version of the GTX Go 40 for vapers looking for more autonomy. You can use more powerful GTX coils for greater vapor production.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• 80 W power
• 5 ml capacity
• Top filling
• Automatic setting

Kit contents

• 1 Vaporesso GTX Go 80 battery
• 1 Vaporesso GTX Pod 26 cartridge
• 1 GTX Mesh 0.20 ohm coil
• 1 USB Type C cable
• 1 French manual

Specifications

• Height: 13.3 cm
• Diameter: 2.6 cm
• Weight : 107 g
• Capacity: 5 ml
• Proprietary drip tip
• PCTG tank
• Compatible with Vaporesso GTX coils
• Power: 80 W
• Max charge current: 2 A
• Capacity: 3000 mAh
• Coils supplied: 1 Vaporesso GTX Mesh 0.2 ohm coil
• Power usage: from 45 to 60 W for EUC Mesh 0.2 ohm coils
• Type of inhalation: direct
• Type of vapor: airy
• vapor: warm to hot
• Percentage of VG in the liquid for optimum use: ≥ 50% Vegetable Glycerin
• Level: regular

Use

- Charging your Vaporesso GTX GO 80 battery:
Plug the USB cable into your battery port (USB-C socket). You can also vape while charging your battery.

Charge indicator after each puff:

• Green LED: charge between 70% and 100%.
• Blue LED: charge between 30% and 69%
• Red LED: charge less than 29%

- Changing the Vaporesso GTX coil:
Pull on the cartridge to remove it from the battery. Change the coil by pulling on it and replacing your cartridge. Soak your coil in a few drops of e-liquid before vaping. Remember to change your coils every 10 to 15 fills.

- Filling your Vaporesso GTX Go 80 clearomizer:
Unscrew the top cap of your cartridge by a quarter turn and introduce the e-liquid into the red hole provided for this purpose. Do not fill more than 90% of your tank.

- Switching on/off your Vaporesso GTX Go 80 battery :
Press the "swich" ("power" button) 5 times in succession.

- Adjusting the airflow :
Turn the cartridge to adjust the airflow to your liking. For lovers of vapor, make sure the airflow is wide open. For more flavour, close the airflow a little more.

Advice

- For more information, please refer to the French instructions included in your Vaporesso GTX Go 80 kit.