Vaporesso GTX GO 40 kit

Vaporesso GTX GO 40 kit

Vaporesso GTX Go 40 Kit

The GTX Go 40 is a compact tube-format kit for vapers used to direct inhalation vaping. Its pocket format (11 cm x 2.2 cm diameter) is practical and easy to transport, making it perfect for use as spare equipment. There are no adjustments to make, the battery automatically adjusts itself according to the coil installed in the cartridge.

USB Type C socket

With its 1500 mAh capacity and 40 W of power, you've got all the autonomy you need for everyday vaping. A USB C socket on the tube allows you to charge your equipment more quickly.

Vaporesso GTX Pod 22 mm cartridge

The battery is combined with a magnetic cartridge with a capacity of 3.5 ml. The removable top cap can be taken off with a simple quarter-turn and gives access to a drip-free refill hole that's very practical for everyday use. The drip tip cannot be removed. It is suitable for overhead dispensing.

Cartridge removed

The GTX coil is inserted from the bottom of the cartridge into the hole provided. The airflow at the bottom of the cartridge is adjusted by turning the cartridge in the battery. The airflow control allows a more or less airy draw.

Vaporesso GTX coil

The kit is compatible with Vaporesso GTX coils, renowned for their responsiveness and excellent flavour reproduction.
Range of use :

• GTX coil 0.6 ohm for a range of use between 20 and 26 W: direct draw.

Vaporesso GTX Go 40 complete kit

Calumette's review: An excellent direct vape kit at a very affordable price.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Compact and lightweight
• Top-filling
• Automatic adjustment

Kit contents

• 1 Vaporesso GTX Go 40 battery
• 1 Vaporesso GTX Pod 22 cartridge
• 1 GTX Mesh 0.60 ohm coil
• 1 USB Type C cable
• 1 French manual

Specifications

• Height: 11 cm
• Diameter: 2.2 cm
• Weight : 60 g
• Capacity: 3.5 ml
• Proprietary drip tip
• PCTG tank
• Compatible with Vaporesso GTX coils
• Power: 40 W
• Max charge current: 2 A
• Capacity: 1500 mAh
• Coils supplied: 1 Vaporesso GTX Mesh 0.6 ohm coil
• Power usage: 20 to 26 W for EUC Mesh 0.6 ohm coils
• Type of inhalation: direct
• Type of vapor: airy
• vapor: warm to hot
• Percentage of VG in the liquid for optimum use: ≤ 60% Vegetable Glycerin
• Level: regular

Use

- Charging your Vaporesso GTX GO 40 battery:
Plug the USB cable into your battery port (USB-C socket). You can also vape while charging your battery.

Charge indicator after each puff:

• Green LED: charge between 70% and 100%.
• Blue LED: charge between 30% and 69%
• Red LED: charge less than 29%

- Changing the Vaporesso GTX coil:
Pull on the cartridge to remove it from the battery. Change the coil by pulling on it and replacing your cartridge. Soak your coil in a few drops of e-liquid before vaping. Remember to change your coils every 10 to 15 fills.

- Filling your Vaporesso GTX Go 40 clearomizer:
Unscrew the top cap of your cartridge by a quarter turn and introduce the e-liquid into the red hole provided for this purpose. Do not fill more than 90% of your tank.

- Switching on/off your Vaporesso GTX Go 40 battery :
Press the "swich" ("power" button) 5 times in succession.

- Adjusting the airflow :
Turn the cartridge to adjust the airflow to your liking. For lovers of vapor, make sure the airflow is wide open. For more flavour, close the airflow a little more.

Advice

- For more information, please refer to the French instructions included in your Vaporesso GTX Go 40 kit.