Innokin Kroma-R kit
Innokin presents the evolution of the Kroma-A kit. Gone is the Zenith clearomizer, replaced by the Zlide clearomizer, for a modernised, ergonomic design.
Kroma-R 18650 battery cover
The Kroma-R box mod has a 18650 battery located underneath the box. The frame is made of zinc alloy. With its rounded curves and a casing that's pleasant to the touch, it offers excellent ergonomics for a perfect grip.
Ignition trigger and USB socket
The ignition button has been replaced by a trigger under the screen, making it even easier to use. The battery is charged via a micro USB socket on the bottom of the device.
Innokin Kroma-R kit screen
With its screen, selecting the different operating modes (Wattage, Variable Voltage, Curve for a personalised power curve) is very intuitive. Note that the WV and VV are also available in preheat mode (Soft = light, Norm = normal or Hard = powerful) for improved coil responsiveness. The screen also displays your vape settings, such as battery charge, coil value and number of puffs. You can vape at a maximum power of 80 W.
Disassembled Zlide D24 clearomizer
The kit comes with the Zlide D24 4.5 ml clearomizer. Designed for indirect vaping, it's perfect for beginners, but will also suit lovers of a tight draw. It is filled from the top via a sliding top cap. The pyrex can be completely removed for replacement.
Innokin Z coil
Z coils deliver perfect flavour reproduction. 2 types of coil are supplied with the kit:
Innokin Kroma-R complete kit
Sold without 18650 battery
Calumette's review: An elegant, well-designed mod box. The colour screen makes it easy to read the information. It feels great in the hand. Beautiful finish.
E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we recommend you try out several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching on/off your Innokin Kroma-R box:
Press the swich 3 times in succession.
- Recharging your Innokin Kroma-R box:
Plug the micro USB cable into the USB port of your computer or wall socket. Plug in your Innokin Kroma-R box.
- Setting the power on your Kroma-R kit:
Press and hold the "+" or "-" button for several seconds. When the power value flashes, you can adjust the power of your box mod.
- Changing the operating mode :
Switch on your box mod. Press the "+" and "-" buttons to select the desired operating mode. Move around using the "+" and "-" buttons and confirm using the trigger.
- Accessing the sub-menu :
To access the sub-menu, press the "+" button and the trigger. You can set your puff counter to 0 by selecting "clear".
- Lock the "+" and "-" buttons:
To lock the "+" and "-" buttons, and avoid any adjustment incidents during transport, press the "-" button and the trigger. A red or green padlock logo will indicate that the buttons are locked.
The green and red padlocks at the top left of the screen indicate that the buttons are locked.
- Filling your Innokin Zlide clearomizer:
Remove the drip tip and push the top cap in the direction indicated by the arrow. Pour your liquid into the slot. Close again.
- Changing the coil :
Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer and replace the top cap ring in the "close" position. Remember to change your coils every 4 to 5 refills.
- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow as required. The ring allows you to block more or less the holes through which the air enters the clearomizer. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.
- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. This will prevent a burnt taste.