Innokin Zlide D24 clearomizer

The Zlide clearomizer is another version of the Zenith clearomizer. Its aim is not to replace its big brother, but to offer a different design and a different technology. Its 24 mm diameter and 4 ml capacity give it excellent autonomy.

Innokin Zlide clearomizer filling system

The main new features are the opening system and the possibility of replacing the tank glass. It opens with a sliding top cap, which can be locked in place with the drip tip. Simply remove the drip tip to open the top cap. An ingenious system that prevents accidental opening.

By unscrewing the top cap, you can easily replace the tank glass, which is quite rare on this type of clearomizer. You won't need pliers or any other tool to perform this delicate operation.

Removed Z coil

Another advantage of this model is the use of Innokin Z coils, which are identical to those on the Zenith. The indirect inhalation draw is perfect for beginners or people looking for flavour with a restrictive draw. And the flavours are there! As with the Zenith, the Z-coils deliver excellent flavour reproduction.

Range of use :

• Innokin Z coil 1.2 ohm with an operating range of between 10 W and 14 W for indirect inhalation.
• Innokin Z coil 0.8 ohm with an operating range of 15 W to 18 W for indirect to restrictive direct inhalation.

Innokin Zlide D24 complete clearomizer kit

Calumette's review: Both the Zlide and the Zenith are very good clearomizers offering fairly similar vape characteristics. The choice between the two will be based on the opening system: sliding for the Zlide and quarter-turn for the Zenith. The replacement of the tank glass on the Zlide is a significant advantage that should also be taken into account.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Top filling
• Large capacity
• Use of Z coils

Kit contents

• 1 Innokin Zlide 4 ml clearomizer
• 1 Z Coil 1.2 ohm
• 1 Z Coil 0.8 ohm
• 1 replacement tank glass
• 1 O-rings kit
• 1 user manual

Specifications

• Length: 4.8 cm
• Diameter: 2.4 cm
• Weight : 67 g
• 510 screw thread
• Proprietary drip tip
• Stainless steel and pyrex
• Compatible with Z coils
• Inhalation type: indirect
• vapor type: airy to slightly restrictive
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner to regular.

Use

- Filling your Innokin Zlide clearomizer:
Remove the drip tip and push the top cap in the direction indicated by the arrow. Pour your liquid into the slot. Close again.

- Changing the coil :
Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer and replace the top cap ring in the "close" position. Remember to change your coils every 4 to 5 refills.

- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow as required. The ring allows you to block more or less the holes through which the air enters the clearomizer. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- We suggest you place a few drops of e-liquid on the cotton part of your Z coil. Leave the coil to soak for 30 seconds. You'll avoid a burnt taste and leaks.