Innokin Zlide D22 clearomizer

Following on from the Zlide D24 mm, the Zlide clearomizer is now available in a 22 mm diameter. It's an updated version of the Zenith clearomizer. Its aim is not to replace its big brother, but to bring a different design and technology. With its 2 ml capacity, it offers a good compromise between size and autonomy.

Filling system of the Zlide D22 clearomizer

The main new features are the opening system and the possibility of replacing the tank glass. It opens with a sliding top cap, which can be locked in place with the drip tip. Simply remove the drip tip to open the top cap. An ingenious system that prevents accidental opening.

By unscrewing the top cap, you can easily replace the tank glass, which is quite rare on this type of clearomizer. You won't need pliers or any other tool to perform this delicate operation.

Location of the Z coil

Another advantage of this model is the use of Innokin Z coils, which are identical to those on the Zenith. The indirect inhalation draw is perfect for beginners or people looking for flavours with a restrictive draw. And the flavours are there! As with the Zenith, the Z-coils deliver excellent flavour reproduction.

The Zlide D22 comes with the excellent 0.48 ohm Z-Plex 3D coil, which embodies the perfect compromise between flavour and vapor production.

Range of use :

• Innokin Z coil 1.6 ohm with an operating range of 10 W to 14 W for indirect inhalation.
• Innokin Z coil 0.48 ohm with an operating range of 13 W to 16 W for indirect to restrictive direct inhalation.

Innokin Zlide D22 complete clearomizer kit

Calumette's review: With its smaller diameter than the Zlide D24, the Zlide D22 can be fitted to most boxes on the market while retaining the same features as its big brother.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Top-fill
• D22 diameter
• Use of Z coils

Kit contents

• 1 Innokin Zlide 2 ml clearomizer
• 1 Z Coil 1.6 ohm
• 1 Z Plex 3D coil 0.48 ohm
• 1 replacement tank glass
• 1 O-rings kit
• 1 user manual

Specifications

• Length: 4.7 cm
• Diameter: 2.4 cm
• Weight : 59 g
• 510 screw thread
• Proprietary drip tip.
• Stainless steel and pyrex
• Compatible with Z coils
• Inhalation type: indirect
• vapor type: airy to slightly restrictive
• vapor: cold to warm.
• Percentage of VG in liquid for optimal use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Filling your Innokin Zlide clearomizer:
Remove the drip tip and push the top cap in the direction indicated with the arrow. Pour your liquid into the slot. Close again.

- Changing the coil :
Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer and replace the top cap ring in the "close" position. Remember to change your coils every 4 to 5 refills.

- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow as required. The ring allows you to block more or less the holes through which the air enters the clearomizer. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- We suggest you place a few drops of e-liquid on the cotton part of your Z coil. Leave the coil to soak for 30 seconds. This will prevent a burnt taste and leaks.