Innokin Zenith Pro clearomizer

The emblematic Zenith pro clearomizer is back with an impressive 5.5 ml capacity and 55 mm height. The finish is beyond reproach, and the new colours add a touch of sparkle and modernity. The redesigned drip dip and decorative ring add character to the whole. Customise your clearomizer: a red ring for the black Zenith, a silver ring for the blue/Gun Metal and a blue ring for the silver Zenith.

Zenith Pro filling slot

Filling is based on the Zenith concept and takes place from the top, thanks to an ingenious rotation system that reveals a wide slot. This small, pragmatic mechanism makes it possible to secure the device without any risk of leakage. By plugging the holes in the coil, it limits the 'flooding' effect of the coil.

The clearomizer has an adjustable airflow which, depending on the degree of opening, offers an airy or tight vape. Unlike the Zenith, the Zenith Pro has an air adjustment 'hole' but also a wide slot for a more airy and semi-direct inhalation.

Another change is that the clearomizer is now easier to remove. Unlike its predecessor, which had a tank with a pressed cage that could not be removed, the Zenith Pro can be dismantled almost entirely, making it easier to clean and replace the tank glass.

Z Coil 1.2 ohm

Zenith Pro is supplied with Zenith Z coil 1 ohm, but is compatible with all Innokin Z coils. Easy to install, it clips on and can be replaced without having to empty the tank.

Economical on the battery, the Zenith Pro consumes very little liquid. Its large diameter means it needs a fairly wide box.

Range of use :

• Innokin Z coil 1.2 ohm with an operating range of between 10 W and 14 W for indirect inhalation.
• Innokin Z coil 1 ohm with an operating range of 20 W to 25 W for direct inhalation.

Zenith Pro complete Kit

Calumette's review: Just perfect! At last, an MTL (indirect inhalation) clearomizer that has all the advantages of a clearomizer for direct vaping. Large tank capacity, ease of use on a daily basis and excellent flavour reproduction, what more could you ask for?

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we recommend you try out several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• 5.5 ml capacity
• Anti-clogging system on filling
• Coil with anti-spray protection grid
• Adjustable air flow

Kit contents

• 1 Innokin Zenith Pro clearomizer
• 1 Innokin Zenith 1.2 ohm coil
• 1 Innokin Zenith 1 ohm coil
• 1 replacement drip tip
• 1 replacement tank glass
• 1 decorative ring
• 1 O-rings kit
• 1 manual

Specifications

• Length: 5.6 cm
• Diameter: 2.45 cm
• Weight : 81 g
• Capacity : 5.5 ml
• 510 screw thread
• Removable plastic drip tip 510
• Pyrex tank glass
• Compatible with Innokin Z coils
• Inhalation type: indirect to semi-direct
• Type of vapor: tight to airy
• vapor: cold to warm depending on the coil
• Percentage of VG in liquid for optimal use: ≤ 50% Vegetable Glycerin
• Level: beginner to regular

Use

- Filling your Innokin Zenith Pro clearomizer:
Turn the top cap a quarter turn in the direction indicated "open". Pour your liquid into the slot. Close again.

- Changing the coil :
Turn the top cap ring slightly in the "open" direction, without opening the filling slot. Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves. Close the base of the clearomizer and replace the top cap ring in the "close" position. Remember to change your coils every 4 to 5 refills.

- Adjusting the Airflow :
Turn the Airflow ring to adjust the airflow as required. The ring allows you to block more or less the holes through which the air enters the clearomizer. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. Once your Zenith Pro clearomizer has been filled with e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure that the liquid is well impregnated into the Zenith coils. This will avoid a burnt taste.

- Make sure you respect the wattage ranges of your coils.