GPC Coils - Staggerton coils (2 pack)

GPC Coils - Staggerton coils (2 pack)

GPC Coils come straight from Alsace. Handcrafted by Léo, a coil enthusiast, they are of superb quality and can be easily fitted to your mounting plates. Entirely designed and handmade in France, the rigour of the design can be felt when you vape, allowing you to choose the best type of coil for your needs. The craftsman advises against cleaning the coil with a metal brush, preferring softer brushes or a cloth. Metal can significantly alter your coil and reduce its lifespan.

Staggerton GPC Coils are available in 3 values (the resistance is expressed in double-coil assembly):

• Staggerton V1 - 0.08 ohm (0.16 in single coil assembly):
  Imposing coils with a low resistance, the production of vapor is enormous, dense and hot. They really come into their own with gourmand liquids. Because of their low resistance, this type of coil should only be used on electronic boxes, for safety reasons.
  Advantage: vapor production
  
  
• Staggerton V2 - 0.11 ohm (0.22 ohm in single coil assembly):
  The V2s have a slightly higher resistance than the V1s, and will be more focused on flavour reproduction, with fairly large drippers or atomisers.
  Advantage: good compromise between flavour reproduction and vapor production.
  
  
• Staggerton V3 - 0.17 ohm (0.34 ohm single coil):
  Its higher resistance gives it greater versatility and will be perfectly suited to gourmand or fruity liquids.
  Advantage: very good flavour reproduction

Advantages

• Quality craftsmanship
• Long service life
• Sold in pairs

Specifications

Staggerton V1 Ni80 0.08 ohm :

• Length: 4 turns
• Inside diameter: 3.0 mm
• Material: Ni80

Staggerton V2 Ni80 0.11 ohm :

• Length: 5 turns
• Internal diameter: 3.0 mm
• Material: Ni90

Staggerton V3 Ni80 0.17 ohm :

• Length: 5 turns
• Internal diameter: 3.0 mm
• Material: Ni80

User guide

You vape and want to get started with rebuildable atomisers by creating your own assemblies, your own coils, upgrading or replacing certain parts of your e-cig. Before you get started, here's some useful information:

• Resistive and non-resistive wires :

- Resistive wires: wires that conduct heat under the action of electrical energy (battery). Once heated, the wire transforms the e-liquid into a vapor.

- Non-resistive wires: this wire does not conduct heat, but it does conduct the electrical current to the resistive wire.

• Properties of the different alloys :

- Khanthal is an iron-chromium-aluminium alloy. This material can withstand high temperatures. It is an excellent conductor of heat.

- Stainless steel (SS316) is malleable and not very susceptible to corrosion.

- Nichrome (Ni) is an alloy of chromium and nickel that withstands high temperatures. It has a high heat resistivity.

- Titanium (Ti) is a lightweight material that resists corrosion and high temperatures. It protects the internal components from a sudden rise in temperature.

Depending on the alloy used, the coil will be more or less resistive. For example, for the same diameter, Nichrome will be more resistive than Khantal. That's why it's important to adapt the wire to the equipment you're using. If you have a box with temperature control (temperature between 100° and 300°), you will need to use Titanium (Ti) or Ni200 wire, which can withstand these temperatures.

• Diameters :

The ohm value of your coil depends on the diameter of the resistive wire used. The thicker the diameter, the lower the resistance in ohms (low resistance). In other words, the thicker your coil wire (large diameter), the faster and stronger it heats up. More hit, more vapor.

• Essential equipment:

- Cutting pliers: to cut your different wires precisely.
- a Kuro concept kit or steel rod for microcoil to wrap the wire around and create coils perfectly equal to the selected diameter.
- coil wire adapted to your equipment.
- a digital ohmmeter to check the value of the coil resistance and avoid short circuits.
- Ceramic-head pliers for handling the coils.
- Organic cotton.

Advice

- Resistive wire should only be used by experts. Once you've built your coil, be sure to check the resistance value using an Ohm meter to avoid any risk of short circuits.