Eleaf GS Tank TC clearomizer

Eleaf GS Tank TC clearomizer

Easy to use, the GS Tank TC is equipped with an adjustable Air flow, a 3 ml tank glass and 2 GS AIR Ni 200 0.15 ohm coils. Removable drip tip with heat-isolating seal. Suitable for vapers using Temperature Control. Excellent value for money.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Adjustable airflow to control the flow and density of the vapor
• Tank glass to preserve flavours
• Temperature control with Ni 200 0.15 ohm coils to adjust the heating temperature of your coil. Make sure you have the right equipment (e.g. Eleaf Istick box: 40 W TC, 60 W TC, etc.).
• Can be used (without temperature control) for traditional vaping, provided you use GS AIR pure cotton 1.5 ohm, pure cotton 1.2 ohm or 0.75 ohm coils.

Specifications

• Length: 5.2 cm
• Diameter : 2.2 cm
• Weight : 35 g
• Capacity : 3 ml
• 510 screw thread
• 510 metal drip tip
• Pyrex tank glass
• Compatible with all boxes and batteries with the same diameter as the GS Tank, i.e. 2.2 cm.
• Coil supplied: GS AIR Ni 200 0.15 ohm with an operating range of 30 W to 40 W.
• Compatible with GS AIR TC Ni 200 0.15 ohm coils for all those using Temperature Control (TC) with suitable equipment.
• Compatible with GS AIR pure cotton 1.5 ohm, pure cotton 1.2 ohm and pure cotton 0.75 ohm coils (without TC).
• Type of inhalation: indirect or direct
• vapor type: airy
• vapor: warm
• Percentage of VG in liquid for optimum use: ≤ 50 % Vegetable Glycerin
• Level: regular

Use

- Filling your GS Tank clearomizer:
Unscrew the base of the tank and fill by introducing the e-liquid along the inside walls of the GS Tank into the wide notches provided. Make sure you don't go over the metal part and avoid the central tube. Then screw back in.

- Changing the coil :
Unscrew the base of the tank and the coil. Change the coil and screw back on. Remember to change your coils every 10 to 15 fills.

- Adjusting the Air Flow :
Turn the AIRFLOW ring to adjust the air flow as required. The ring allows you to block the hole through which the air enters the clearomizer to a greater or lesser extent. The more the hole is open, the more the vapor. In short, for a tight draw, leave the air hole almost closed and for a more airy draw, leave the air hole wide open.

Advice

- We suggest you put a few drops of e-liquid on the cotton part of your GS AIR coil. Once your GS Tank clearomizer is full of e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to ensure that the liquid is well impregnated into the GS AIR coils. This will prevent damage to your coil and a burnt taste.

- Make sure you respect the wattage ranges of your coils.