Kuro Concepts CW Coil

Kuro Concepts CW Coil

The perfect tool for rebuilding atomizers, this tool makes coils with perfect turns in record time.
Set of 3 Kuro concept tools with diameters of 1 mm, 2 mm and 3 mm.

Use

To create your coil, take 7 to 8 cm of Kanthal wire and a pair of wire-cutting pliers. Choose the diameter of your Kuro Concept (blue, red or purple tool depending on the diameter).
Thread your wire through the small hole in the side and pull it out. Take the tip and turn to wind your coils onto the rod.
You've just created your coil. You can space out the turns of your coil by repositioning the wire on the rod and pulling on one end of the Kanthal to loosen the whole spiral.

Specifications

• Length: 9.2 cm
• Weight : 32 g