Innokin Coolfire PZPulse kit

Innokin Coolfire PZPulse kit

Innokin Coolfire PZPulse Kit

Innokin is back with a brand new pod, the Coolfire PZPulse. Versatile, lightweight and compact, it's designed for users looking for a direct draw. Its rounded design and the textured leatherette on the back of the box make it a pleasure to hold.

The device has a 2400 mAh battery with a maximum output of 80 W. Satisfactory autonomy, so you can vape all day long.

USB-C charging socket

Charging is via the USB-C socket on the front of the box. Make sure you charge your device using a wall socket with an output current of 2A or less.

The pod operates on variable wattage only. All you need to do is respect the coil values to get the most out of your pod.

Front of the box

On the front of the box, you'll find the main button and two +/- buttons for vaping, changing power or accessing the menu.

Large colour screen

There's also a large, clear, easy-to-read colour screen that gives you all the vape info you need at a glance. On the side of the box, there's a slide button that lets you lock or unlock the box.

Innokin PZPulse cartridge

The 5.5 ml PZPulse cartridge ensures long hours of vaping.

Teflon filling lid

The cartridge is filled from the top thanks to the Teflon lid.
Just below the drip tip is the adjustable airflow, allowing you to choose a more or less airy draw.

Innokin PZP Max 0.4 ohm coil

To coincide with the release of the Coolfire PZPulse, Innokin is offering a new PZP Max coil. Two coils are supplied in the pack: 0.4 ohm (pre-installed) and 0.2 ohm.

Power ratings:

• PZP Max 0.4 ohm coil with an operating range of between 40 and 60 W for direct draw.
• PZP Max 0.2 ohm coil with an operating range of between 60 and 80 W for direct and airy draw.

You'll need to make sure you use a liquid with more than 50% VG, as the feed holes are large and designed for thick liquids.

Innokin Coolfire complete PZPulse kit

Calumette's review: Looking for a kit that's both compact and easy to use, with a direct, airy draw? Then this is the kit for you! With its 5.5 ml tank, it'll last all day long.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Simple to use
• Extremely clear, easy-to-read display
• Adjustable airflow
• 5.5 ml tank

Kit contents

• 1 Innokin Coolfire PZPulse battery
• 1 Innokin Coolfire PZPulse 5.5 ml cartridge
• 1 Innokin PZP Max 0.4 ohm coil (pre-inserted)
• 1 Innokin PZP Max 0.2 ohm coil
• 1 drip tip
• 1 USB-C to USB-C cable (please check compatibility with your wall socket)
• 1 French user manual

Specifications

• Length: 11.7 cm
• Width: 4.2 cm
• Depth: 2.9 cm
• Weight : 169 g
• Capacity: 5.5 ml
• Removable Coolfire PZPulse cartridge
• 510 plastic drip tip
• PET tank
• Compatible with Innokin PZP Max coils
• Power rating: 80 W
• Max charging current: 2 A
• 2400 mAh capacity
• Coils supplied: Innokin PZP Max 0.4 ohm and 0.2 ohm
• Power consumption: from 40 to 60 W for the 0.4 ohm coil and from 60 W to 80 W for the 0.2 ohm coil
• Type of inhalation: Direct
• Type of vapor: Airy
• vapor: warm to hot
• Percentage of VG in liquid for optimum use: > 50% Vegetable Glycerin
• Level: Regular

Use

- Lock/unlock:
Slide the slider on the side of the box upwards to unlock and downwards to lock.

- Switching on/off :
Make 3 consecutive presses on the swich.

- Charging your Pod :
Connect the USB Type C cable to the box and to a wall adaptor (with a USB-C port) or to the USB-C port on a computer.

- Adjusting the power:
Long press the "+" or "-" button, the Watts value will flash to adjust the power. Confirm by pressing the trigger once.

- Accessing your Pod menu:
Switch on your box mod. Press the "+" and "-" buttons for 2 seconds to access the menu. Move around with the "+" and "-" buttons and confirm with the trigger.

- Accessing the information menu :
To access the information menu, press the "+" button and the switch for 1 second. You can reset your puff counter to 0 by selecting the "brush" logo.

- Fill your cartridge:
Lift the black silicone cap on top of the cartridge and fill the cartridge. Close the cap.

- Changing the coil :
Remove the cartridge. Pull on the coil below the cartridge and insert a new cartridge. Replace the cartridge.

- Adjusting the Airflow :
Turn the adjustment ring at the top of the cartridge to the right or left depending on the type of vape you are looking for.

Advice

For more information, please refer to the French instructions included in your Innokin Coolfire PZPulse kit.