Geek Vape Wenax Q Pro kit

Geek Vape Wenax Q Pro kit

Geek Vape Wenax Q Pro kit

The Wenax range is back in force with the Wenax Q Pro. Its metal frame makes it easy to hold. The design is modern, elegant and comes in a wide range of colours.

USB-C charging socket

It features a 1200 mAh battery with maximum power of 30 W for all-day use. Your Wenax Q Pro kit charges in 30 minutes via the USB-C socket on the side of the battery.

Adjustable airflow

The kit has an adjustable airflow to switch from a tight draw to a more airy draw.

The Wenax Q is very easy to use with two choices: automatic on suction or by pressing the button.

0.96" colour display

The front panel features a 0.96" colour OLED screen, a main button and 2 touch buttons. The main button is used to switch the device on and off, enter the menu, adjust the wattage and trigger the vape.

Disassembled cartridge

The Wenax Q Pro kit offers 2 modes:

- "Intelligent" or "Smart" mode, which automatically adapts the wattage according to the ohm value of the installed cartridge.

- Manual mode, known as "Power", where you can adjust the wattage as you wish (make sure you respect the range of use of the cartridge).

Teflon side filler cap

The battery is fitted with the Geek Vape Wenax Q Pro 3ml cartridge with built-in coil.
It is available in 0.8 ohm, 0.6 ohm and 0.4 ohm. The cartridge is filled from the side by lifting the Teflon cover.

Range of use :

• Geek Vape Wenax Q Pro 0.8 ohm cartridge for a range of use between 12 and 18W, for indirect draw. Suitable for tight draw and high nicotine strength.
  
  
• Geek Vape Wenax Q Pro 0.6 ohm cartridge for a range of use between 19 and 25W, for indirect draw to restrictive direct draw. Suitable for airy draw for a more powerful vape.

Geek Vape Wenax Q Pro complete kit

Calumette's review: A compact, easy-to-use, high-performance kit. Automatic detection of the value of the coil as well as automatic vaping give you undeniable vape comfort. All you have to do is enjoy the flavour and the vapor, and the Wenax Q Pro Kit will take care of the rest.

E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic or button ignition
• Automatic or manual power setting
• 1200 mAh battery
• Quick charge in 30 minutes
• Lightweight and powerful

Kit contents

• 1 Geek Vape Wenax Q Pro battery
• 1 Geek Vape Wenax Q Pro 0.6 ohm cartridge
• 1 Geek Vape Wenax Q Pro 0.8 ohm cartridge
• 1 USB C cable
• 1 user manual

Specifications

• Length: 12.3 cm
• Width: 2.6 cm
• Depth: 1.8 cm
• Weight : 64 g
• Capacity: 3 ml
• Contact by magnetic cartridge
• Proprietary drip tip
• PCTG tank
• Compatible with Geek Vape Wenax Q Pro and Wenax Q cartridges
• Power usage: 30 W
• Max charge current: 2 A
• Capacity: 1200 mAh
• Coils supplied: one Geek Vape Wenax Q Pro 0.6 ohm cartridge and one Geek Vape Wenax Q pro 0.8 ohm cartridge
• Power usage: from 12 to 18 W for the 0.8 ohm coil, from 19 to 25 W for the 0.6 ohm coil.
• Type of inhalation: indirect to restrictive direct
• vapor type: tight to slightly airy
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner to regular

Use

- Switching on and off:
Press the "power" button 5 times in less than a second to switch on your battery. 5 further presses will switch the device off completely.

- Charging:
Plug the USB C cable into your Wenax Q Pro to charge it.

- Changing power :
Button unlocked, press 3 times in less than a second to change the power. Then change the power using the touch buttons.

- Accessing the menu:
Press the button 4 times in less than a second to change modes and access settings.

- Filling your cartridge:
Lift the Teflon cover on the side of the cartridge to fill your cartridge.

- Vaping:
After waiting 5 minutes, you can vape in automatic mode by inhaling directly or in manual mode by using the "power" button.

Advice

We recommend that you prime your coil inside the cartridge by sucking on it several times (cartridge removed from battery to force priming).