Geek Vape Wenax S3 Evo kit

Geek Vape Wenax S3 Evo kit

Geek Vape Wenax S3 Evo kit

The Wenax S3 kit continues to evolve to the delight of vapers with the Evo version: new colours, an improved cartridge with a more practical magnetic system and a soft-touch drip-tip.

Its tube format and 50g weight make it easy to hold and comfortable to use on a daily basis.

The S3 Evo features an 1100 mAh battery with a maximum power output of 18W for up to 2 days of moderate use. It is charged from the side of the battery via a USB-C plug.

Button under the battery

The kit is used in automatic mode, with suction. All you have to do is inhale to vape. You can choose between 3 power modes: light, medium and strong. Boost mode is activated by pressing the button and vaping at the same time. All the power from the battery will then be sent to the coil.

The button has 3 functions:

• Turn the device on/off
• Change the power (light, medium and strong)
• Activate "Boost" mode

Adjustable airflow

At the top of the battery, you'll find the adjustable airflow, which gives you a tight to slightly airy draw.

Geek Vape incorporates a new-generation S cartridge with a more practical magnetic system and an anti-leak system.

Side-mounted filler cap

The Geek Vape Wenax S3 Evo kit comes with a 0.8 ohm cartridge, but you can also install 1.2 ohm cartridges that are better suited to tight draws and high nicotine strengths. These cartridges are also compatible with the Geek Vape Wenax M1 kit.

With a capacity of 2 ml, the cartridge is filled by lifting the Teflon cover, which is fully protected by the battery once in place.

Thanks to Geek Vape's VPU coil system, flavour reproduction is excellent.

You can choose between 3 types of drip tip:

- the "soft touch" drip tip (pre-installed)
- the Teflon drip tip
- the fake cigarette filter

Geek Vape Wenax S3 Evo complete kit

Calumette's review: The Wenax S3 Evo kit offers a number of improvements in terms of user-friendliness, in particular the magnetic cartridge system, as well as greater ease of use thanks to the power adjustment and "Boost" mode.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic lighting
• Power adjustment
• Choice of drip tip: soft touch, Teflon or fake cigarette filter
• Lightweight and compact

Kit contents

• 1 Geek Vape Wenax S3 Evo battery
• 1 Geek Vape Wenax S 0.8 ohm cartridge
• 1 soft touch drip tip
• Warning: USB-C recharging cable (sold separately)

Specifications

• Length: 12.4 cm
• Diameter: 1.9 cm
• Weight : 50 g
• Capacity: 2 ml
• Contact by magnetic cartridge
• Soft-touch drip tip
• PCTG tank
• Compatible with Wenax S cartridges
• Power rating: 18 W
• Max charge current: 1 A
• Capacity: 1100 mAh
• Inhalation type: indirect
• Type of vapor: tight
• vapor: cold
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Switching on and off:
Press the "power" button 5 times in less than a second to turn your battery on. 5 more presses will lock the button under the battery and 5 more presses will turn the device off completely.

- Charging :
Plug the USB C cable into your Wenax S3 Evo to charge it.

Charge indicator after each puff :

• Green LED: charging between 70% and 100%
• Blue LED: charging between 31% and 69%
• White LED: less than 30% charge

- Changing power :
Button unlocked, press 3 times in less than a second :

• Green LED: high power
• Blue LED: medium power
• Red LED: low power

To activate the "Boost" mode, simply press the button and vape at the same time.

- Filling your cartridge:
Pull the cartridge out of the battery. Lift the Teflon cover to fill your cartridge and put it back in place.

- Vaping:
After waiting 5 minutes, you can vape by inhaling directly onto your Wenax S3 Evo.

Advice

We recommend that you prime your coil inside the cartridge by sucking on it several times (cartridge removed from battery to force priming).