Voopoo Doric 60 Pro kit
Voopoo Doric 60 Pro kit
Voopoo is offering us the Pro version of the Doric 60 kit. While the Pro version retains all the advantages of the Doric 60, it brings versatility and comfort of use.
The round format and size remain the same, making it easy to hold. The kit is relatively light, despite the metal frame.
The integrated battery offers excellent autonomy with its 2500 mah for a maximum power of 60W.
Locking wheel
A thumbwheel appears at the bottom of the device, enabling you to lock the ignition switch without having to switch off your Doric 60 Pro completely.
The switch is used to set and operate your Doric 60 Pro. This kit only works when you press it, so there's no automatic switch-on when you inhale as in the previous version.
You can choose between 3 power modes (low, medium or high). Battery power adapts automatically to the value of the coil detected.
USB-C connection
The battery is topped by a magnetic 5ml PNP-X cartridge, which now features an airflow at the top to adjust the airflow for a tighter or looser draw.
Disassembled cartridge with coil
The kit includes 2 drip tips: an oval drip tip for a tight draw and a wide drip tip for a semi-direct or direct draw.
Battery and cartridge
The cartridge has an integrated PNP-X coil, with an extra seal to limit leakage when using the device. 2 coils are supplied in the kit.
Range of use :
Voopoo Doric 60 Pro complete kit
Calumette's review: a kit that has evolved in terms of the cartridge, with the choice of draw, airflow adjustment and the new generation of PNP-X coils. However, we regret the disappearance of automatic ignition, especially with these new coils.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching your Doric 60 Pro on/off:
Perform 5 consecutive presses on the "swich".
- Charging your Doric 60 Pro:
Plug the USB-C cable into your computer's USB port or wall socket. Your battery has a charge indicator.
Charge indicator after each puff :
- Setting the power :
Press the "power" button 3 times to set your power: "soft", "normal" or "hard".
- Filling your cartridge:
Pull on the drip of the cartridge to remove it from the pod. Lift the Teflon cover on the side of the cartridge and fill it. Then put your cartridge back in place.
- Changing the coil :
Pull on the drip of the cartridge to remove it from the pod. Then remove the coil and fit a new one. Put your cartridge back in place.
- using your Doric 60 Pro :
Press the "power" button to vape.
- We suggest you place a few drops of e-liquid on the cotton part of your Voopoo PnP-X coil. This will prevent a burnt taste.