Fumytech Fused Clapton DL Quad Core Ni80 Prebuilt single 0.20 ohm coils

Fumytech Fused Clapton DL Quad Core Ni80 Prebuilt single 0.20 ohm coils

Hellvape is a major player in the world of drippers and atomisers. It now offers prebuilt coils that cover a wide range of possibilities for direct or indirect vaping.

The Quad Core Fused Clapton is a medium-sized coil for intense direct vape. It's suitable for medium to large-sized trays. Quad Cores are not afraid of power surges.

It is made up of 4 main wires in 28GA Ni80 covered with a 36 GA Ni80 wire. The internal diameter is 3 mm with a total of 5 turns.

These coils are highly responsive and perfectly suited to cloud chasing.

As the ohm value of each coil is relatively low (0.20 ohm), we advise against using double coils on a mechanical mod or box mod. Instead, opt for an electronic mod or box mod, which will at least protect your equipment.

Advantages

• High vapor production
• Excellent heating response

Specifications

• 10 Quad Core Fused Clapton Ni80 coils
• 4 x 28 GA Ni80 wires and 1 x 36 GA Ni80 wire
• Ni80 alloy

User guide

You vape and you want to get started with rebuildable atomisers by creating your own assemblies, your own coils, upgrading or replacing certain parts of your e-cig. Before you get started, here's some useful information:

• Resistive and non-resistive wires :

- Resistive wire: a wire that conducts heat under the action of electrical energy (battery). Once heated, the wire transforms the e-liquid into a vapor.

- Non-resistive wire: this wire does not conduct heat, but it does conduct the electrical current to the resistive wire.

• Properties of the different alloys :

- Khanthal is an iron-chromium-aluminium alloy. This material can withstand high temperatures. It is an excellent conductor of heat.

- Stainless steel (SS316) is malleable and not very susceptible to corrosion.

- Nichrome (Ni) is an alloy of chromium and nickel that withstands high temperatures. It has a high heat resistivity.

- Titanium (Ti) is a lightweight material that resists corrosion and high temperatures. It protects the internal components from a sudden rise in temperature.

Depending on the alloy used, the coil will be more or less resistive. For example, for the same diameter, Nichrome will be more resistive than Khantal. That's why it's important to adapt the wire to the equipment you're using. If you have a box with temperature control (temperature between 100° and 300°), you will need to use Titanium (Ti) or Ni200 wire, which can withstand these temperatures.

• Diameters :

The ohm value of your coil depends on the diameter of the resistive wire used. The thicker the diameter, the lower the resistance in ohms (low resistance). In other words, the thicker your coil wire (large diameter), the faster and stronger it heats up. More hit, more vapor.

• Essential equipment:

- Cutting pliers: to cut your different wires precisely.
- a Kuro concept kit or steel rod for microcoil to wrap the wire around and create coils perfectly equal to the selected diameter.
- coil wire adapted to your equipment.
- a digital ohmmeter to check the value of the coil resistance and avoid short circuits.
- Ceramic-head pliers for handling the coils.
- Organic cotton.

Advice

- Resistive wire should only be used by experts. Once you've built your coil, be sure to check the resistance value using an Ohm meter to avoid any risk of short circuits.