BD Vape Précisio GT RTA atomizer

BD Vape Precisio GT RTA atomizer

BD Vape Precisio GT atomizer

The Precisio GT atomizer is Bd Vape's new little marvel. With a diameter of 22 mm, it remains relatively compact and the machining is perfect. The whole unit is well calibrated, whether you're talking about the drip tip or the atomising bell.

Wide filling slots

The quarter-turn top cap, topped by a 510 drip tip, allows you to fill your atomizer (3.7 ml capacity). The atomizer comes with a highly resistant opaque Ultem tank as well as a transparent tank glass, which is more sensitive to shocks.

Disassembled tank

The lower part of the atomizer is the result of extensive research. The atomiser bell is located under the tank. It has 2 feed holes for the coil, which operates by gravity. The BD Vape brand has developed a system that sends the liquid linearly over the cotton to optimise flavour reproduction.

Single coil mounting plate with side clamp

The mounting plate is accessed by pulling on the atomiser bell, which initially reveals the airflow ring, which is non-adjustable. However, it can be replaced by one of 5 rings of different diameters. Simply test the airflow rings and choose the one that suits you best.

Underneath the ring, a large tray can accommodate a coil of imposing diameter. The coil fastening system is effective and holds the coil perfectly in place. The tightening screws are located on the side (a screwdriver is supplied in your box). The screws are made of titanium and are guaranteed to last a long time.

The positive contact stud can be removed by removing the 510 pin, making it easy to clean your atomizer.

BD Vape Precisio GT RTA complete atomizer kit

Calumette's review: The BD Vape Precisio atomizer is well designed. A real reflection has been conducted so that the operation of the device optimizes the restitution of flavors. If you're looking for a well-made RDL atomizer, the Precisio is for you. It comes in a beautiful box.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we recommend you try out several different e-liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Gravity feed system
• Quality of manufacture
• Excellent flavour reproduction

Kit contents

• 1 BD Vape Precisio GT RTA atomizer
• 1 O-rings kit
• 1 replacement tank glass
• 1 flat screwdriver
• 2 replacement screws
• 2 cotton wicks
• 2 coils
• 1 replacement drip tip 510
• 1 user manual

Specifications

• Length: 5.4 cm
• Diameter: 2.2 cm
• Weight : 60 g
• Capacity : 3.7 ml
• 510 screw thread
• 510 drip tip
• Assembly: single coil
• Stainless steel spray bell
• Compatible with coils: rebuildable coils
• Inhalation type: direct to restrictive direct
• vapor type: airy
• vapor: cold to hot
• Percentage of VG in liquid for optimum use: ≤ 90% Vegetable Glycerin
• Level: expert

Use

- Placing your coils:
Pull out the base of the atomizer to access the tray (we recommend screwing the atomizer onto a box for easier disassembly). Unscrew the screws on the plate using the screwdriver supplied.

Cut the coil wires using the template supplied. Place your coils on the tray and tighten the screws. Carefully cut a piece of cotton about 0.5 cm long and roll it up to fit in the centre of the coil.

Redirect the wicks on either side of the coils and trim the excess so that the cotton does not protrude from the tray. Soak your cotton well before closing your atomizer/dripper. Now all you have to do is fill it up and vape!

We advise you to check the resistance in ohms of each of your coils with an ohm meter. if the resistance is too low or short circuited, your equipment could be seriously damage.

Advice

- We suggest you try several different threads and cottons to find your ideal vape. Bear in mind that the thinner the thread, the greater the resistance, and vice versa.