Geek Vape Wenax S3 kit

Geek Vape Wenax S3 kit

Geek Vape Wenax S3 Kit

The success of the Wenax range has been undeniable over the years. This small piece of equipment has been designed for cigarette-style vaping and high nicotine strengths. The Wenax S3 is a clever mix of the Wenax M1 and H1. It's the ideal partner for beginners.

It comes in a relatively lightweight 12 cm tube format. Sober colours, some with engravings.

Button under the battery

The device has an 1100 mAh battery for maximum power of 18 W. That's more than enough power for a reasonable day's use. The C-type charging socket is located on the side of the battery.

It can be used in automatic mode: all you have to do is inhale to start vaping. A button and LED appear on the underside of the device.
This button has 3 functions:

• Turn the device on/off
• Change the vape power
• Activate boost mode

You can choose between three power modes: light, medium and strong. The boost mode is activated by pressing the button and vaping at the same time. All the power from the battery will be sent to the coil.

Adjustable airflow

At the top, there's an adjustable airflow for a tight or slightly airy draw. The Wenax S cartridge sits on top. Geek Vape has taken great care to limit leaks and the effect of condensation in contact with the coil.

Cartridge removed

This is integrated into the cartridge and you can choose between two types of coil, 1.2 or 0.8 ohm, perfect for beginners.

Side-filling lid

The advantage of these cartridges is that they can be fitted with a drip tip or fake cigarette filter, which is the same as the Wenax M1 cartridges. Inside the kit you'll also find 2 drip tips.

Geek Vape Wenax S3 complete kit

Calumette's review: A simple kit with satisfactory autonomy. Choice of drip tip or fake cigarette filters. An affordable kit that's perfect for getting started in vaping with complete peace of mind!

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic lighting
• Power adjustment possible
• Use of drip tip or fake cigarette filters
• Lightweight and compact

Kit contents

• 1 Geek Vape Wenax S3 battery
• 1 Geek Vape Wenax S 1.2 ohm cartridge
• 1 Geek Vape Wenax S 0.8 ohm cartridge
• 2 drip tips
• 3 fake filters
• 1 USB C cable

Specifications

• Length: 12.4 cm
• Diameter: 1.9 cm
• Weight : 51 g
• Capacity: 2 ml
• Contact by magnetic cartridge
• Proprietary plastic drip tip
• PCTG tank
• Compatible with Wenax S cartridges
• Power: 18 W
• Max charge current: 1 A
• Capacity: 1100 mAh
• Inhalation type: indirect
• Type of vapor: tight
• vapor: cold
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Switching on and off:
Press the power button 5 times in less than a second to switch your battery on. 5 more presses will lock the button under the battery and 5 more presses will switch the device off completely.

- Charging :
Plug the USB C cable into your Wenax S3 to charge it.

Charge indicator after each puff :

• Green LED: charge between 70% and 100%.
• Blue LED: charging between 31% and 69%.
• White LED: less than 30% charge

- Changing power :
Button unlocked, press 3 times in less than a second to change power:

• Green LED: high power
• Blue LED: medium power
• Red LED: low power

To activate the "Boost" mode, simply press the button and vape at the same time.

- Filling your cartridge :
Pull the cartridge out of the battery. Lift the Teflon cover to fill your cartridge and put it back in place.

- Vaping:
After waiting 5 min you can vape by inhaling directly onto your Wenax S3.

Advice

We advise you to prime your coil inside the cartridge by inhaling on it several times (cartridge removed from battery to force priming).