Kiwi Vapor Kiwi 2 Pod kit
Kiwi Vapor 2
Building on its success with the Kiwi, Kiwi Vapor is bringing out version 2. The design is identical, with curves and a pleasant feel in the hand.
Kiwi 2 powerbank rear panel
There are 2 components: a pen and a powerbank. While the pen loses 50 mAh of autonomy (which is negligible), Kiwi Vapor has chosen to increase the autonomy of the powerbank from 1450 mAh to 1800 mAh. A very substantial gain for increased vape autonomy.
Charging socket under the powerbank
The pen and powerbank are charged via a USB socket located on each of the components. Once the pen is in use, it can also be recharged directly in the powerbank, which is what makes it so interesting. A magnetic system attracts the battery to the right place and a sound vibration is heard when charging begins.
The touch-sensitive button on the powerbank is used to monitor the battery charge. Vaping is automatic.
Kiwi 2 Pen
The main changes concern the Kiwi Vapor pen, which has been equipped with new features. The battery capacity has been reduced from 450 to 400 mAh, compensated for by the increased capacity of the powerbank.
The new pen will detect the presence or lack of liquid in the cartridge. You'll no longer have to constantly check your e-liquid level.
Child-resistant cartridge
The cartridges are also evolving, with a 0.8 ohm coil instead of 1.2 ohm. Vaping is more intense, but these cartridges are still less suited to nicotine salts.
A child-resistant ring covers the filler cap. To access the filler hole, you now have to push the ring downwards.
Please note: the cartridges are not compatible with the first version of the kiwi.
You can, of course, continue to use the Kiwi Vapor filters or the Kiwi Vapor drip tip.
Kiwi Vapor Kiwi 2 complete Pod kit
Calumette's review: Kiwi Vapor has improved its flagship model with 2 major upgrades: increased autonomy and liquid detection in the cartridge. Available in 1 or 2 versions, this is a trendy, practical and simple model that's ideal for beginners.
E-liquids not included: Complete your purchase with e-liquids.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Charging your Kiwi Vapor 2 battery:
Plug the USB cable into the port on your PowerBank and set up your e-cigarette. The battery will stay on for the duration of the charge and the lights will go out when the charge is complete.
- Powerbank charging indicator :
- Kiwi pen charging indicator:
The pen lights up red when only 10% of the battery is left.
- Refilling your cartridge :
Remove the cartridge from the pod to access the filler cap on the side of the cartridge. Pull on the metal ring to access the Teflon seal. Fill the cartridge and put it back in place.
- Vaping:
Aspire on your pod after filling the cartridge and that's it!
- For more information, please refer to the French instructions included in your Kiwi Vapor kit.