Aspire Minican 3 Pro kit
Aspire Minican 3 Pro
Aspire has upgraded its Minican 3 to a Pro version. Although slightly taller, its size remains the same, with an OLED screen on the side. The battery life has been extended from 700 mAh to 900 mAh.
USB-C charging socket on the underside of the device
Charging is carried out via a USB-C socket on the underside of the device, with a maximum current of 1A.
0.96" OLED screen
A small, clear and legible 0.69" screen makes its appearance on this Pro version. You can control the number of puffs, the charge of your battery and even adjust the power from 5 to 20 W using a button next to the screen. The button only allows you to set the parameters, as vaping is automatic and is triggered by puffing.
The Minican 3 cartridge features a removable 0.8 ohm mesh-type coil that delivers a slightly tighter draw with perfectly reproduced flavours.
By avoiding the need to change the entire cartridge, the replaceable coil is more environmentally friendly, as it greatly reduces plastic consumption.
Filler cap and coil slot
To fill the cartridge, simply lift the Teflon cover on the underside of the cartridge. And best of all, Aspire Minican 2 or 1 cartridges are compatible with this version 3!
So you can change equipment while keeping your old cartridges and your favourite draw.
Range of use :
Aspire Minican 3 Pro complete kit
Calumette's review: This Pro version is really well thought out, with its screen and the ability to adjust vape settings. The battery offers a greater capacity to compensate for the power consumption of the screen while maintaining the same autonomy. If you're a fan of the minican, this pro version is for you.
E-liquid not included: complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Switching on and off:
Press 5 times in less than a second to turn your device on or off.
- Charging your battery:
Plug the USB cable into your battery port. The battery will stay on while you charge it, then go out to indicate that it is fully charged.
- Charging indicator :
You can check the charge of your battery using the OLED screen.
- Reset puff counter:
Press the button for 3 seconds to reset the puff counter.
- Replacing the coil:
Remove the cartridge, pull out the coil to replace it.
- Refilling your cartridge:
Remove the cartridge from the pod to access the filler cap on the underside of the cartridge. Fill the cartridge and put it back in place.
Aspire on your pod after filling the cartridge and that's it!
- For more information, please refer to the French instructions included in your Aspire Minican 3 Pro kit.