Geek Vape Wenax Q kit

Geek Vape Wenax Q kit

Geek Vape Wenax Q

Building on the success of its various Wenax kits, Geek Vape is back with a more accomplished version: the Wenax Q. While the shape is the same as that of the Wenax H1, that's where the comparison ends, as the Wenax Q has undergone a number of changes.

Side charging socket

Inside, a 1000 mAh battery offers reasonable autonomy throughout the day. The device has a maximum power output of 25W, which is unusual for this type of device. Charging is via a USB Type C socket.

Airflow for regulating airflow

Opposite the charging socket, an airflow adjusts the airflow precisely and efficiently using three holes.
The device operates in automatic mode, simply by aspiring, or in manual mode by pressing the button. Versatility for everyday use.

Display showing wattage, charge level and number of puffs

A small screen appears on the front panel. Extremely simple to use, you can check the power, battery capacity and number of puffs. A single button is available for setting your device.

While the presence of a single button may seem confusing at first, it soon proves to be practical and intuitive.

Pod Wenax Q and its cartridge

At the top of the pod is a cartridge with integrated coil. Two 1.2 ohm and 0.6 ohm cartridges are available in the kit.

Filling port under the mouthpiece

The cartridge has a capacity of 2 ml for reasonable use throughout the day. The liquid is introduced through the top of the cartridge by unclipping the mouthpiece, which gives access to the filling port.

Power consumption :

• GeekVape Q 1.2 ohm cartridge can be used over a range of between 8 W and 12 W for an indirect draw. Suitable for tight draw and high nicotine strengths.
• GeekVape Q 0.6 ohm cartridge for use between 18 W and 25 W for indirect to restrictive direct draw. Suitable for airy vaping for a more powerful vape.

Geek Vape Wenax Q complete kit

Calumette's review: A high-performance, efficient kit in a small package. Perfect if you want to upgrade from the Geek Vape Wenax H1 to a more advanced model.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic or button ignition
• Power setting
• 1000 mAh
• Lightweight and compact

Kit contents

• 1 Geek Vape Wenax Q battery
• 1 Geek Vape Wenax Q 1.2 ohm cartridge
• 1 Geek Vape Wenax H1 0.6 ohm cartridge
• 1 user manual

Specifications

• Length: 11.4 cm
• Width: 2.4 cm
• Depth: 1.3 cm
• Weight : 52 g
• Capacity: 2 ml
• Contact by magnetic cartridge
• Proprietary plastic drip tip
• PCTG tank
• Compatible with Wenax Q cartridges
• Power usage: 25 W
• Max charge current: 1 A
• Capacity: 1000 mAh
• Inhalation type: indirect to restrictive direct
• Type of vapor: tight to slightly airy
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Filling your cartridge:
Pull on the cartridge to remove it from the battery. Unclip the mouthpiece to access the filling hole. Fill your cartridge and put the mouthpiece back in place.

- Charging your battery:
Plug the USB cable into your battery port (USB-C socket). You can also vape while charging your battery.

- Adjusting the wattage:
Press the "power" button three times to change the wattage. The wattage indicator will flash and you'll just need to press the power button as many times as necessary to adjust the wattage.

- Switching on and off:
Press the "power" button 5 times in less than a second to switch the appliance on. Press again 5 times to lock the appliance, the button will be locked and only the automatic switch-on will be operational. Press again 5 times to switch the device off completely.

- Vaping:
After waiting 5 min you can vape by aspiring directly onto your Wenax Q or by using the "power" button on the front panel.

Advice

We recommend that you prime your coil inside the cartridge by sucking on it several times (cartridge removed from battery to force priming).