Eleaf Ijust P40 kit
Eleaf ijust P40
Eleaf is back with a pod that's both versatile and formidably effective in everyday use. Eleaf has simplified its P40 battery to make it suitable for all types of vaper. The modern design is very colourful and peppy. The very light weight of the device makes it very comfortable to hold.
Charging socket under the battery
The Ijust P40 is fitted with a 1500 mAh battery that delivers a significant 40 W maximum. Charging is via the USB C socket under the battery.
Adjustable airflow for a tight overhead draw
At the back of the battery, another button adjusts the airflow according to your vaping habits.
The battery's various pre-set wattages.
The box has an ignition button and two adjustment buttons that give access to pre-set wattages.
You can select 10, 15, 20, 25, 30, 35 and 40 W depending on the coil you've inserted in the cartridge.
Box and D20 cartridge
The D20 cartridge is the same as the one in the Eleaf Ijust D20 Kit. This versatile 3 ml cartridge offers indirect or direct draw depending on your needs. It is fitted to your box by magnetic contact.
Filling port under the sliding top cap
The sliding top cap makes filling efficient by avoiding any risk of spillage along the cartridge. The top cap is topped by a removable 510 drip tip.
Eleaf GTL coil.
The Eleaf GTL 1.2 ohm, 0.80 ohm and 0.40 ohm coils allow you to choose between a tighter or airier draw with excellent flavour reproduction.
Range of use :
Eleaf Ijust P40 complete kit
Calumette's review: A simple and effective kit thanks to its pre-registered wattages. The use of the D20 cartridge and Eleaf GTL coils makes it suitable for all types of vaper.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Filling your D20 cartridge:
Slide the top cap and introduce the e-liquid along the inside walls of the cartridge. Then close.
- Charging your Ijust D20 battery:
Plug the USB cable into your battery port (USB-C socket). You can also vape while charging your battery.
Charge indicator after each puff:
- Adjusting the power of your device:
Press the "+" or "-" button to adjust the power of your device according to the coil.
- Changing the coil:
Pull on the drip to remove the cartridge from the pod. Then remove the coil to fit a new one. Put your cartridge back in place.
- Adjusting the airflow :
Turn the airflow slider to adjust the airflow to your liking. For vapor lovers, make sure the airflow is wide open. Conversely, for more flavour, we invite you to close the airflow more.
- Vaping :
Press the power button to start vaping.
- We suggest you place a few drops of e-liquid on the cotton part of your Eleaf GTL coil. This will prevent a burnt taste.