Voopoo Uforce L clearomizer
Voopoo UForce L clearomizer
Voopoo is known as a specialist in high-capacity equipment, and it proves it once again with the Uforce L clearomizer.
The modern design is particularly well crafted, with all the metal parts precisely machined. With a diameter of 26 mm and a capacity of 4 ml, which can be increased to 5.5 ml with the bulb tank glass, the Uforce clearomizer is imposing. A Cerberus engraved on the chimney sets the tone for the product's strong character.
Quarter-turn removable top cap
Filling is done from the top of the clearomizer via the top cap, which opens in a quarter-turn. There are 2 anti-drip filling openings. Filling is made easier by the use of fine pipettes.
Adjustable airflow at the top
The top cap is topped by an 810 drip tip for a very airy, powerful draw. Below the top cap is an airflow made up of an independent, removable ring for precise airflow adjustment. The airflow is positioned at the top to avoid any risk of leakage.
Double rings to evacuate the heat generated by the coil.
The bottom of the clearomizer also features a finely cut base with 2 rings that evacuate the heat generated by the coil.
Voopoo Pnp TW20 coil
The UForce is fitted with PnP coils with relatively low values of between 0.15 ohm and 0.20 ohm. These TW versions have a double mesh and generate up to 25% more puff. They are designed for dense, powerful vaping.
Power usage :
Voopoo UForce-L complete clearomizer kit
Calumette's review: The Uforce L clearomizer is designed for Subohm and suitable for high wattages. Like all equipment of this type, you should use liquids with more than 50% Vegetable Glycerin.
E-liquid not supplied: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Filling your clearomizers:
Turn the top cap to unscrew it by a quarter turn. Fill your clearomizer and close.
- Changing the coil :
Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Fit a new one, making sure that your clearomizer is not full or that it does not exceed half the tank.
- Adjusting the airflow :
Move the airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.
- To prolong the life of your coil and avoid a dry hit on first use, we suggest you prime your coil by placing a few drops of e-liquid on the cotton part. Once your clearomizer is full of e-liquid, inhale (without activating the battery) by closing the airflow to thoroughly impregnate your coil.