Nevoks Feelin C1 kit
Nevoks Feelin C1 pod
The Nevoks kit is a small pod with a futuristic design, very well conceived and effective. The ABS and Polycarbonate body of the battery reveals the electronic components, giving it its originality.
USB C socket and airflow
The power button is easily accessible for ergonomic handling. The pod can be used when pressing the button or in automatic mode, when inhaling.
The Netvoks Feelin C1 has a 1000 mAh battery for reasonable autonomy. Fast charging is via USB type C plug.
Operating lights
On the front of the pod, 4 LEDs indicate operation, charge level and selected power. You can modulate the power levels from lowest to highest by pressing the "power" button 3 times in succession.
Depending on the direction of the cartridge, you can adjust the airflow for a tighter or looser draft.
At the top is a 2.8 ml heat-resistant PCTG pod. The oval mouthpiece makes it easy to touch your lips. You won't find an adjustable airflow on this pod, but Nevoks offers a solution that involves changing the direction of the cartridge to switch from an indirect draw to a restrictive direct draw.
Cartridge removed
The cartridge is filled by lifting the Teflon cover. The mesh technology SPL 10 coils ensure excellent flavour reproduction. There are 4 coil models to choose from: 1 ohm, 0.8 ohm, 0.6 ohm and 0.4 ohm. We recommend the 1 ohm coil for high nicotine strengths, nicotine salts and CBD.
Nevoks SPL 10 coil
Your kit comes with two coils:
Nevoks Feelin C1 complete kit
Calumette's review: Simple, effective and compact, the little Feelin C1 will go everywhere with you.
E-liquid not supplied: Complete your purchase with e-liquids.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Charging your Nevoks Feelin C1 battery:
Plug the USB cable into your battery port (USB-C socket). You can also vape while charging your battery.
Charge indicator after each puff:
- Adjusting the power of your device:
Press the "power" button 3 times to change the power.
- Inserting the coil:
Remove the cartridge and fit the coil, then the cartridge.
- Filling your cartridge:
Remove the cartridge from the pod to access the side filler cap. Fill the cartridge and put it back in place.
- Vaping:
Aspire on your pod after filling the cartridge and that's it! Or press the "power" button under your battery to vape.
- We suggest you wait 10 minutes before you start vaping so that the cartridge's coil is properly primed.