Aspire Flexus Q kit

Aspire Flexus Q kit

Flexus Q Pod

Aspire is once again expanding its range with the Flexus Q pod, a compact and ultra-light format. It offers a host of benefits: the choice of automatic or manual triggering, ultra-fast charging in 10 minutes with a 3A power outlet and a wide range of vape options from MTL to RDL.

Cartridge disassembled

The Flexus Q's coil is made of a Zinc alloy that makes it easy to grip. With a maximum power output of 18 W and a capacity of 700 mAh, you can vape for most of the day without needing to recharge.

USB-C charging socket under the pod

Aspire is breaking new ground with an ultra-fast 10-minute charge, since the Flexus Q can accept a high charging current provided you use a 3A charger. Small capacity but great responsiveness and extended autonomy. On the practical side, the USB type C charging socket is located under the pod, so you can vape while you charge.

Ignition and adjustment button

On the front of the Flexus Q, the button lets you vape when you press it or adjust the power of your device. You can also vape in automatic mode without pressing the button, just by inhaling.

Sliding airflow control knob

Another knob on the side controls the airflow and regulates the draw in tight, direct mode or a little more airy for a restrictive direct draw.

Flexus Q cartridge

A 2 ml cartridge is clipped onto the top of the pod. It is filled from the side and is only accessible once the cartridge has been removed.

Aspire AF coil

The Flexus Q is used with Aspire AF coils:

• Aspire AF Mesh 1 ohm coil for a range of use between 12 and 15 W: indirect, tight draw, perfect for starting with high nicotine strengths.
• Aspire AF Mesh 0.6 ohm coil for a range of use between 15 and 18 W: restrictive direct draw, more powerful for a more airy vape.

Aspire Flexus Q complete kit

Calumette's review: An excellent, well-finished pod with an ultra-fast 10-minute charge so you'll never run out of power. In manual or automatic mode, vaping has never been so easy.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we recommend you try out several different e-liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic or manual
• Ultra-fast charging
• Adjustable wattage
• Charge indicator
• Interchangeable coil

Kit contents

• 1 Aspire Flexus Q pod
• 1 Aspire Flexus Q cartridge
• 1 Aspire AF 1.0 ohm coil
• 1 Aspire AF 0.6 ohm coil
• 1 USB Type C cable
• 1 French manual

Specifications

• Height: 11.3 cm
• Width: 2.2 cm
• Depth: 1.3 cm
• Weight : 52 g
• Capacity : 2 ml
• Clip-on cartridge
• Drip tip integrated into the cartridge
• PCTG tank
• Compatible with Flexus Q cartridges
• Power: 18 W
• Max charge current: 3 A
• Capacity: 700 mAh
• Coils supplied: 1 Aspire AF 1.0 ohm coil and 1 Aspire AF 0.6 ohm coil
• Power usage: from 12 to 15 W for the 1 ohm coil, from 15 to 18 W for the 0.6 ohm coil.
• Power usage: depends on the coil.
• Type of inhalation: indirect to restrictive direct
• Type of vapor: tight
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Filling your Flexus Q cartridge:
Pull on the cartridge to remove it from the battery. Lift the Teflon cover to fill your cartridge and put it back in place.

- Charging your Flexus Q :
Plug the USB-C cable into your battery port (USB-C socket). You can also vape while charging your battery.

Charge indicator after each puff:

• Green LED: charge between 70% and 100%.
• Blue LED: charge between 31% and 69%
• Red LED: charge less than 30%.

Adjusting the power of your device:
Press the "power" button 3 times to change the power.

Power indicator :

• Red LED: low power
• Blue LED: normal power
• Green LED: high power

- Vaping:
After waiting 5 min you can vape by inhaling directly onto your Flexus Q or by using the "power" button on the front panel.

Advice

- For more information, please refer to the French manual included in your Aspire Flexus Q kit.