Hellvape Fat Rabbit Solo RTA atomizer

Hellvape Fat Rabbit Solo RTA atomizer

Fat Rabbit Solo RTA atomizer

Hellvape presents the Fat Rabbit Solo RTA, a high-capacity atomizer that stands out for its versatility. Despite its imposing size, its modern design is uncluttered.

With a diameter of 25 mm, it has a modular tank, depending on whether you choose the straight 4.5 ml tank glass or the 5.5 ml bulb format.

As usual, Hellvape has produced a perfectly machined atomizer with no play in operation: an undeniable quality advantage that will come in very handy over time.

Removable top cap for filling the atomizer

The Fat Rabbit is designed for direct vaping and a very airy draw, topped with an 810 drip tip. The top cap can be removed with a quarter-turn, giving access to two large filling inlets suitable for all types of bottles.

Left: top of RTA removed/Right: atomisation bell removed

The Fat Rabbit is divided into three parts: the top cap, which holds the tank glass and the air intake chimney, the atomisation bell and the mounting plate.

Airflow above the coil

This atomizer is unique in that it has two airflows: one on the atomizer bell for ventilation above the coil and a second under the mounting plate to cool it.

Airflow n°2 under the coil

As a result, the flavour reproduction is unique, whatever the type of vape you're looking for.

Mounting plate

The plate is relatively large, making it easy to access your mounts. Unlike many mounting plates, the screws are accessible from the side and not from the top, making it easy to tighten the coils.

A template is supplied with the kit to cut the legs of your coils to size. The Fat Rabbit can be used with single or double coils with the same effectiveness. Whether you're looking to sublimate the flavour or do some Cloud Chasing, the Fat Rabbit is undoubtedly a reference model.

Hellvape Fat Rabbit Solo RTA complete atomizer kit

Calumette's review: Despite its size, the Fat Rabbit Solo is an excellent atomizer both in terms of the quality of the flavours delivered and the clouds of vapor. On the technical side, the plate is well machined for easy assembly. The Rabbit range remains a safe bet in terms of atomizers.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we recommend testing several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Single or dual coils
• Large tank capacity
• Quality of manufacture
• Double airflow.
• Excellent flavour reproduction

Kit contents

• 1 HellVape Fat Rabbit Solo RTA atomizer
• 1 O-rings kit
• 1 flat screwdriver
• 2 replacement screws
• 1 cotton wick
• 1 bulb tank glass
• 1 Fused Clapton Ni80 0.37 ohm coil
• 1 coil template
• 1 user manual

Specifications

• Length : 5.1 cm
• Diameter : 2.5 cm
• Weight : 70 g
• Capacity: 5.5 ml or 4.5 ml depending on tank glass
• 510 screw thread
• 810 drip tip
• Assembly: double coil or single coil
• Stainless steel atomisation bell
• Compatible with coils: rebuildable coil
• Inhalation type: direct
• vapor type: airy
• vapor: cold to hot
• Percentage of VG in liquid for optimum use: ≤ 90% Vegetable Glycerin
• Level: expert

Use

- Placing your coils:
Turn the base of the atomizer a quarter turn to access the base of the plate. Unscrew the plate screws using the screwdriver supplied.

Cut the coil threads using the template supplied. Place your coils on the plate and tighten the screws. Carefully cut a piece of cotton about 0.5 cm long and roll it up to fit in the centre of the coil.

Redirect the wicks on either side of the coils and trim the excess so that the cotton does not protrude from the plate. Soak your cotton well before closing your atomizer/dripper. Now all you have to do is fill it up and vape!

We advise you to check the resistance in ohms of each of your coils with an ohm meter. A too low coil or a short circuit can seriously damage your equipment.

Advice

- We suggest you try several different threads and cottons to find your ideal vape. Bear in mind that the thinner the thread, the higher the resistance, and vice versa.