Aspire Zelos 3 kit
Aspire Zelos 3 Kit
Following on from the Zelos 2S kit, Aspire now presents the Zelos 3 kit. An ergonomic, rounded design with a large colour screen. It is fitted with the Nautilus 3, the successor to the Nautilus 2S. Designed for beginners, it is nonetheless suitable for more regular vapers.
Aspire uses an alloy of zinc and aluminium to give the box lightness and strength. With a width of 28 mm, the box can accommodate large-diameter clearomizers. The Nautilus 3 clearomizer, with its 25 mm diameter, blends in perfectly with the lines of the box.
With a maximum power of 80W and a large capacity of 3200 mAh, you can vape all day without worrying about charging. Charging is via a USB type C plug for fast charging. An On/Off button on the underside of the box turns the box on and off.
Box Zelos 3 screen
The large 0.96" TFT colour screen incorporates the ASP Aspire chipset. The clear, precise display makes it easy to navigate through the various menus: Variable Wattage, Variable Voltage, Bypass, TCR (temperature control) and CPS (power curve setting).
Nautilus 3 sliding top cap
As far as clearomizers are concerned, Aspire has succeeded in transforming the Nautilus into an easier-to-use model. It is filled from the top via a sliding top cap. It incorporates 2 drip tips: a short, narrow 510 drip tip and an oval drip tip, depending on the type of vape you're looking for.
Airflow Nautilus 3
With a large 4 ml capacity and a 24 mm all-round diameter, the Nautilus 3 is cut out for long-haul vaping. The clearomizer's meticulous design and solidly carved frame add to its quality and sturdiness.
The coil can be changed without having to empty the tank. A system for blocking liquid inlets makes it easy to change the coils.
Aspire Nautilus coils
What would a Nautilus be without Aspire Nautilus coils? The Nautilus 3 incorporates these famous coils, whose reputation is well established. The coil is no longer screwed onto the base or chimney, but is fitted into the hole in the base. With this ingenious system, the coil no longer gets stuck in the chimney or, worse still, stuck on the base.
The Nautilus 3 base houses an airflow with 7 holes of different diameters. You can choose between several airflow orifices: 0.8 mm, 1 mm, 1.2 mm, 1.5 mm, 1.8 mm, 2.5 mm and 3.0 mm. From very tight to slightly airy, the draw will adapt to your vape and will also depend on the coil you choose.
The kit comes with 2 Aspire Nautilus coils:
Aspire Zelos 3 complete kit
Calumette's review: An excellent starter kit! The Nautilus 3 clearomizer is a pleasant surprise, both in terms of its design and its evolution compared to the previous Nautilus 2 and 2S models.
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Charging your Aspire Zelos 3 kit:
Plug the USB type C cable into the USB port on your Zelos 3.
- Switching your Zelos 3 box on and off:
Set the switch under the box to "on" or "off" depending on your needs.
- Locking your Aspire Zelos 3:
Press the "power" button 3 times to lock or unlock the settings buttons.
- Changing modes:
Press the "+" and Power buttons simultaneously to access your device's menu.
- Filling your Aspire Nautilus 3 clearomizer:
To fill your tank simply push the top cap (A red arrow drawn on it tells you which way to push) and you will access the filling opening.
- Changing the coil :
There's no need to empty your tank when changing your coil. Simply unscrew the clearomizer from its base and pull the coil out. A spring system will prevent the liquid from leaking out. Prime your coil by placing a few drops of e-liquid on the surface of the cotton.
- Adjusting the airflow:
Rotate the adjustment ring on the 5 small-diameter holes for indirect inhalation or on the two larger holes for semi-direct inhalation.
- We suggest you prime your coil by placing a few drops of e-liquid on the cotton part of your Aspire Nautilus coil to avoid a dry hit and a burnt taste.