Dotmod DotStick clearomizer

Dotmod DotStick clearomizer

With the Dotstick clearomizer, Dotmod is playing in the big league. A luxury and refinement found nowhere else in the world of vaping. Not only is this little jewel an object of impeccable aesthetics, it's also particularly ingenious.

Clearomizer base disassembled

With a capacity of 2 ml, the tank is made from heat-resistant PCTG. Once you've removed the clearomizer base by turning it a quarter turn, you'll see a funnel-shaped filling hole at the top of the clearomizer. All you have to do is press the pipette from your bottle onto the filling system to introduce the liquid into the tank. The liquid reaches its target precisely, with no risk of external contamination.

Dotstick clearomizer base and locking system

The clearomizer base is mounted on spring-loaded balls for quarter-turn unscrewing and screwing. There's no risk of unscrewing the clearomizer base from the mod by mistake, as you need to apply pressure and turn the tank to remove it.

The draw is fairly indirect, although the 0.4 ohm Dotstick coil allows for a restrictive direct draw. The coils produce generous vapor, thanks to their mesh technology and the use of high-quality cotton.

The kit comes with 2 Dotmod DotStick coils:

• Dotmod DotStick 0.4 ohm coil to be used on a range between 20 W and 30 W for direct inhalation.
• Dotmod DotStick 1 ohm coil to be used on a range between 10 W and 15 W for indirect inhalation.

Dotmod DotStick clearomizer

Calumette's review: a clearomizer worthy of Swiss watchmaking attention to detail. It meets all the criteria (innovation, quality) and achieves the feat of being suitable for all vapers, whether beginners or experts.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Finish
• Innovative

Kit contents

• 1 DotStick clearomizer
• 1 1 ohm coil
• 1 0.4 ohm coil

Specifications

• Height: 4 cm
• Diameter : 2.2 cm
• Weight : 28 g
• Capacity : 2 ml
• 510 screw thread
• Drip tip 510
• Stainless steel and pyrex
• Compatible with Dotmod DotStick coils
• Inhalation type: indirect to restrictive direct
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 60% Vegetable Glycerin
• Level: beginner to expert

Use

- Filling your tank :
Unscrew the base of your clearomizer by a quarter turn, applying pressure to the tank at the same time. Insert the pipette from your bottle into the funnel-shaped hole and introduce the liquid.

- Changing the coil:
Unscrew the base of your clearomizer by a quarter turn, applying pressure to the tank at the same time. Pull out the coil and replace it. Be careful, the tank must not be full.

Advice

- We advise you to soak your coils well before use.