Innokin PZP Max coils (3 pack)

Innokin PZP Max coils (3 pack)

PZP Max coils are used with Innokin PZPulse and Coolfire P60 cartridges. They are designed for indirect to direct vaping, depending on the coil value chosen.

Thanks to the Mesh-type resistive coil, they produce a significant amount of vapor and the flavour reproduction is particularly realistic.

Range of use :

• Innokin PZP Max 0.8 ohm coil with an operating range of 9 W and 14 W for indirect inhalation vaping.
• Innokin PZP Max 0.6 ohm coil with an operating range of 18 W and 23 W for restrictive direct inhalation vaping.
• Innokin PZP Max 0.4 ohm coil with an operating range of 40 W and 60 W for direct inhalation vaping.
• Innokin PZP Max 0.2 ohm coil with an operating range of 60 W and 80 W for direct inhalation vaping.

Specifications

• Mesh technology
• Excellent flavour reproduction

Use

- Changing the coil:
Remove the cartridge. Pull the coil out from under the cartridge and insert a new cartridge. Replace the cartridge.

- Priming your coil:
Pour a few drops of liquid onto the cotton wool to soak your coil. This will prevent a burnt taste.

Advice

- The lower the ohm value of the coil, the stronger the hit and the denser the vapor. On the other hand, the flavours will be a little less well reproduced.