Innokin Z coils (5 pack)

Innokin Z coils (5 pack)

Coils developed by Innokin for the Innokin Zenith, Zenith pro, Zlide, Zenith Nex and GO Z Nex clearomizers. Coils designed for all vapers, for indirect, direct or restrictive inhalation.

Ranges of use :

• Innokin Z coil 1.6 ohm with an operating range of 9 W to 12 W for indirect inhalation vaping.
• Innokin Z coil 1.2 ohm with an operating range of 10 W to 14 W for indirect inhalation vaping.
• Innokin Z coil 1 ohm with an operating range of 20 W to 25 W for direct inhalation vaping.
• Innokin Z coil 0.8 ohm with an operating range of 15 W to 18 W for indirect to restrictive direct inhalation.
• Innokin Z coil 0.6 ohm duo-prime with an operating range of 9 W to 13 W for indirect inhalation vaping.
• Innokin Z coil 0.5 ohm with an operating range of 14 W to 19 W for indirect to restrictive direct inhalation.
• Innokin Z coil 0.48 ohm with an operating range of 13 W to 16 W for indirect to restrictive direct inhalation vaping.
• Innokin Z coil 0.3 ohm with an operating range of 30 W to 40 W for direct inhalation vaping.

Use

- Changing the coil:

Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it correctly in the grooves.
Close the base of the clearomizer and replace the top cap ring in the "close" position.
Remember to change your coils every 4 to 5 refills.

- Priming your coil:
Pour a few drops of liquid onto the cotton wool to impregnate your coil and avoid a burnt taste.

Advice

- We suggest you put a few drops of e-liquids on the cotton part of your Innokin Z Coil. Once your clearomizer is full of e-liquid, remember to inhale (without activating the battery) by plugging all the holes in your clearomizer to thoroughly impregnate the liquid in the coils. This will preserve the life of your coils.