Vaporesso Xros 6 Mini kit

Vaporesso Xros 6 Mini kit

Vaporesso Xros 6 Mini kit

Following on from the XROS 5 Mini, Vaporesso is expanding its range with the XROS 6 Mini, a compact and stylish pod designed for simple, everyday use. Easy to handle and carry, it features a 1600 mAh battery, automatic draw activation and adjustable airflow, allowing you to easily customise the draw.

USB-C port

The XROS 6 Mini features a built-in 1600 mAh battery offering a comfortable run time. It delivers up to 30 W of power, whilst charging is via a USB-C port on the side, with a charging current of up to 2 A.


A series of LEDs makes it easy to monitor the battery charge level and the device’s operation.

Adjustable airflow

The XROS 6 Mini features an adjustable airflow, allowing you to customise your draw, from a tight draw to a more airy draw.

Vaporesso XROS 3 ml COREX 3.0 Cartridge

The kit comes with a 0.6 ohm XROS cartridge featuring COREX 3.0 technology. This setup is particularly well-suited to a semi-airy vape and delivers excellent flavour reproduction whilst maintaining reasonable e-liquid consumption.

Filling port

Filling is simple: just remove the drip tip to access the top-fill port. The Teflon seal is designed to minimise the risk of leaks and drips. The cartridge then attaches easily to the battery thanks to its magnetic system.

The Xros 6 Mini kit is compatible with the full range of Vaporesso Xros cartridges, featuring a wide variety of coil values for greater versatility.

Vaporesso Xros 6 Mini complete kit

Calumette's review: A compact pod that gets straight to the point! The XROS 6 Mini is compact, easy to use and offers a pleasant vaping experience thanks to its adjustable airflow. A particularly appealing model for those looking for a practical device for everyday use.

E-liquid not included: Complete your purchase with some e-liquid.
For your first purchase, we recommend trying several different e-liquids – for example, at least one ‘Classic’ flavour and at least one fruity flavour.

Advantages

• Ease of use
• Compact and portable design
• 1600 mAh capacity
• Automatic activation

Kit contents

• 1 Vaporesso XROS 6 Mini pod
• 1 Vaporesso XROS Mesh 0.6 ohm Corex 3.0 cartridge (pre-installed)
• 1 USB-C cable
• 1 user manual

Specifications

• Length: 11 cm
• Width: 2.5 cm
• Depth: 1.5 cm
• Weight: 64 g
• Capacity: 3 ml
• Connection type: magnetic
• Proprietary drip tip
• Zinc alloy
• Compatible with Vaporesso Xros cartridges
• Maximum charging current: 2 A
• Capacity: 1600 mAh
• Coils included: one Vaporesso Xros Mesh 0.6 ohm Corex 3.0 cartridge
• Inhalation type: indirect to restrictive direct
• Vapor type: dense to slightly airy
• Vapor temperature: cool to lukewarm
• VG percentage in e-liquid for optimal use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Charging your battery:
Plug the USB cable into the port on the Xros 6 Mini.

Charging indicator:

• 5 LEDs: charging between 80% and 100%
• 4 LEDs: charging between 70% and 80%
• 3 LEDs: charging between 40% and 65%
• 2 LEDs: charge between 20% and 40%
• 1 LED: charge below 20%

- Refilling your cartridge:
Remove the drip tip to access the filling cap. Fill the cartridge by inserting your pipette through the Teflon cap and replace the drip tip.
Leave it for a few minutes to allow the coil to soak up the e-liquid.

- Vaping:
Inhale through your pod; vaping will start automatically.

Advice

- We recommend waiting 10 minutes before you start vaping to ensure the cartridge’s coil is properly primed.

- Remember to maintain and clean your kit to extend its lifespan.

- E-liquid may sometimes condense between the battery and the cartridge; feel free to clean this area using a damp cotton bud.

For further information, please refer to the user guide included with your Vaporesso Xros 6 mini kit.