Innokin Sidera Zenith M kit
Innokin Sidera Zenith M kit
Innokin presents the Sidera kit with a "Side by side" box (with remote connection), which makes it compact and easy to hold thanks to its neat design in aluminium and leather.
18650 battery cover
Powerful at up to 60W, it runs on an 18650 replacement battery. You can occasionally recharge your battery directly on the box using the USB-C charging socket.
Front of the Sidera Kit
The front panel features 2 setting buttons and a switch button. For added convenience, Innokin has integrated a second switch button on the side of the box.
Screen and side switch button
There's also an OLED screen on the side of the box, displaying all the data you need to vape.
Equipped with the Evolv DNA 60C chipset, this kit offers a wide range of settings, including Replay mode, which lets you save your settings, and TC mode, which lets you manually control the temperature.
Oled screen
Want to customise your screen and its graphical interface? Visit the Evolv website and download their free software.
Innokin Sidera box and Innokin Zenith M clearomizer
The box comes with the Innokin Zenith M clearomizer. Designed for indirect inhalation, it can easily be converted to restrictive direct inhalation with an adapted coil and drip tip (included in the pack).
With a diameter of just 24 mm and a liquid capacity of 4 ml, it gives you plenty of autonomy. You can use any other clearomizer or atomizer with a diameter of 24 mm. Please note: the clearomizer must be 24 mm in length and have a straight tank glass.
Adjustable airflow
The Zenith M has an airflow located at the bottom of the clearomizer that regulates the draw thanks to a wide slot for a tighter or airier vape.
Teflon filling port
Filling takes place via the top cap, which opens in a quarter-turn to give access to a large orifice protected by a Teflon anti-drip cover.
Innokin Z Coil.
As with all the clearomizers in this range, the Zenith M is fitted with Innokin Z coils. The kit comes with two coils: 0.3 ohm and 0.8 ohm.
Coils power ratings :
Innokin Sidera Zenith M complete kit
Calumette's review: A compact, well-thought-out SBS box, perfect for both regular and expert vapers! It combines versatility and customisation thanks to the DNA chipset. And the Zenith M clearomizer? It's the perfect complement to the Sidera, for balanced, high-quality vaping!
E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.
- Locking/unlocking:
Quickly press the Switch button 3 times.
- Recharging:
Connect a USB-C cable to the port on your Sidera box after inserting an 18650 replacement battery in the recommended direction. The box has a charge indicator.
- Setting the power level:
Select the power level on the screen using the + and - buttons. Press the Switch button then set the power using the + and - buttons. Confirm by pressing the switch button again.
- Filling your clearomizer :
Unscrew the top cap by a quarter turn and fill the tank by introducing the e-liquid along the inside walls of the clearomizer. Then screw it back on.
- Changing the coil :
Unscrew the base of the tank and pull on the coil. The coil is not screwed on but clipped onto the clearomizer. When reassembling, the coil must be properly seated in its housing before replacing the base of the tank.
- Adjusting the Airflow :
Rotate the ring to open the ventilation slots. By modulating the airflow, you can experiment with an airy vape or a tighter draw.
- We suggest you put a few drops of e-liquid on the cotton part of your Innokin Z coil. This will prevent a burnt taste.
- Be sure to respect the maximum usage ranges indicated on your coils.