Joyetech eGo AIO 2 kit

Joyetech eGo AIO 2 kit

Joyetech EGO Aio 2 Kit

The iconic Joyetech Ego AIO kit is back in a new version. The Ego AIO 2 is a clever compromise between the classic Ego AIO kit and the Anniversary version. The result is more accomplished, with a more sober design and more modern colours.

USB C charging socket and tank built into the battery

Inside the device is an integrated 1700 mAh battery with a maximum output of 20 W, giving it excellent autonomy for a day's vaping. On the front, the central button switches the device on and off.

There's no need to adjust the wattage - the Joyetech Ego AIO 2 is fully automatic. It is triggered by aspiration.

Removable top cap acts as a coil holder

To fill the tank, simply unscrew the top cap. Its 2 ml capacity means it will last for a reasonable amount of time.

The airflow built into the top cap adjusts the airflow. The coil is housed under the top cap. The kit comes with two 0.8 ohm BFC coils.

AIO BFC 0.8 ohm coil with visible double wall

The most tangible innovation concerns the coils, which have a double liquid inlet for maximum impregnation when vaping. Unlike BF coils, which contain a resistive wire, BFC coils are mounted with mesh, which optimises vapor production while limiting liquid back-up or spillage.

The BF AIO coils from previous models are still compatible with the EGO AIO 2 kit.

For direct resctrictive vaping, Joyetech BFC 0.8 ohm coils are particularly well suited to low to medium nicotine doses.

If you want a more indirect vape, you'll have to go for the more traditional AIO coils in 1 ohm and 1.5 ohm.

Joyetech EGO Aio 2 Kit

Calumette's review: A long-awaited version, uncluttered and very easy to use. Its main asset: the BFC Mesh coils, which improve vape quality.

Advantages

• Impressive autonomy
• Reduced size
• Tube format
• AIO BFC coil for excellent vapor production

Kit contents

• 1 eGo AIO 2
• 2 Joyetech AIO BFC 0.8 ohm coils
• 1 510 drip tip
• 1 USB-C cable
• 1 user manual in French

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Specifications

• Length: 12.3 cm
• Diameter: 1.9 cm
• Weight : 67 g
• Capacity: 2 ml
• All-in-1 AIO format
• Removable plastic drip tip 510
• Non-removable pyrex tank
• Compatible with: Joyetech AIO BF and BFC coils
• Maximum power: 20 W
• Maximum charge current: 1 A
• Capacity: 1700 mAh
• Coils supplied: 2 Joyetech AIO BFC 0.8 ohm coils
• Inhalation type: indirect to restrictive direct depending on the coil
• Type of vapor: tight to airy
• vapor: warm to hot
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner to regular

Use

- Charging your Ego AIO 2:
Plug the USB-C cable into the USB port on your EGO Aio 2. The LED lights up while charging and goes out when fully charged.

Charge indicator after each puff :

• Green LED: charging between 85% and 100%.
• Cyan LED: charging between 70% and 84%
• Blue LED: charging between 55% and 69%
• White LED: charging between 40% and 54%
• Yellow LED: charging between 25% and 39%
• Violet LED: charging between 10% and 24%
• Red LED: charging less than 9%.

- Activating your EGO Aio 2 kit:
Press 5 times in less than 2 seconds to switch on or off.

- Filling :
Unscrew the "Top" of your EGO Aio 2 by pressing and turning at the same time (childproof pressure/torsion identical to the e-liquid bottle). Fill with liquid until indicated and close.

Warning: when introducing your e-liquid, make sure you do not exceed the maximum limit indicated next to the viewing window, otherwise the e-liquid may come out of the drip tip during vaping.

- Adjusting the Airflow :
The Aiflow is located just after the drip tip. It is indicated by a small hollow dot. Turn the airflow ring to adjust it.

Advice

- We suggest you put a few drops of e-liquids on the cotton part of your coil Joyetech AIO BFC. This will prevent a burnt taste.