Aspire Minican 3 kit

Aspire Minican 3 Kit

Aspire Minican 3

Following the discontinuation of the Minican 2, Aspire is now offering version 3 of its Minican! It retains the general design of the range, but is a little more than a centimetre taller.

The reason it's taller is to increase battery life, from 400 mAh to 700 mAh. An appreciable gain if you want to vape for longer without having to recharge.

USB-C charging socket on the underside of the device

Charging is handled by a USB-C socket on the underside of the device. The device operates in automatic mode, using suction. There's no need to adjust the settings or press a button, just aspire to trigger the device and vape.

Removed coil from the cartridge

The main change concerns the Minican 3 cartridge, which now has a removable coil rather than an integrated one. The 0.8 ohm mesh-type coil offers a slightly tighter draw with perfectly reproduced flavours.
By avoiding the need to change the entire cartridge, the replaceable coil is more environmentally friendly, as it greatly reduces plastic consumption.

Filler cap and coil in the centre

The cartridge is filled by lifting the Teflon cover underneath. And best of all, Aspire Minican 2 cartridges are compatible with this version 3!

So you can change equipment while keeping your old cartridges and your favourite draw.

Aspire Minican 3 complete kit

Calumette's review: A long-awaited version 3, and the results are there for all to see, with a longer battery life and a cartridge with a removable coil that's more environmentally friendly.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Automatic lighting
• Lightweight
• Ultra compact

Kit contents

• 1 Aspire Minican 3 battery
• 1 Aspire Minican 3 cartridge
• 1 Aspire Minican 3 0.8 ohm coil
• 1 USB Type C cable
• 1 French manual

Specifications

• Height: 9.6 cm
• Width: 2.8 cm
• Depth: 1.5 cm
• Weight : 35 g
• Capacity: 3 ml
• Magnetic contact
• Proprietary plastic drip tip
• PCTG tank
• Compatible with Minican 3 coils and cartridges and Minican 2 cartridges with integrated coil.
• Max charge current: 1 A
• Capacity: 700 mAh
• Coils supplied: 1 Aspire Minican 3 coil.
• Power usage: automatic
• Inhalation type: indirect
• Type of vapor: tight
• vapor: cold to lukewarm depending on the cartridge
• Percentage of VG in liquid for optimum use: ≤ 50% Vegetable Glycerin
• Level: beginner

Use

- Charging your battery:
Plug the USB cable into your battery port. The battery will remain lit for the duration of the charge and will go out to indicate that the charge is complete.

- Charging indication :
The battery flashes 10 times to indicate that the battery is low.

- Replacing the cartridge coil:
Remove the cartridge, pull out the coil to replace it.

- Refilling your cartridge:
Remove the cartridge from the pod to access the filler cap on the underside of the cartridge. Fill the cartridge and put it back in place.

- Vaping:
Aspire on your pod after filling the cartridge and that's it!

Advice

- For more information, please refer to the French instructions included in your Aspire Minican 3 kit.