Vaporesso iTank 2 clearomizer

Vaporesso iTank 2 clearomizer

Vaporesso iTank 2 clearomizer

Vaporesso is offering us version 2 of its Itank clearomizer. While it retains some of the assets that made the Itank famous, this new version is more modern and has been reworked to delight lovers of this model.
The capacity remains unchanged: the 8 ml tank is impressive with the Bulb tank glass. it can be adjusted to 5 ml with the straight tank glass supplied in the kit.

Rotating top cap for filling

What has changed, however, is the system for opening the top cap. Instead of a sliding system, a button is now used to open the tank. Clearly more practical in use.

At the bottom of the clearomizer is the airflow adjustment ring. Unlike the previous version, the 3 holes have been replaced by two wide slots, which facilitate airflow to a greater extent. Vapor is powerful and very airy when drawn directly.

Vaporesso GTi coil

The Itank 2 clearomizer works with GTi coils, featuring mesh technology. They have large openings that optimise liquid absorption while producing a generous vapor.
Please note that this coil model requires liquids with at least 70% VG in their composition.

The kit comes with 2 Vaporesso GTi coils:

• Vaporesso GTi 0.20 ohm coil with an operating range of 60 to 75 W for direct inhalation vaping.
• Vaporesso GTi 0.40 ohm coil with an operating range of 50 to 60 W for direct inhalation vaping.

Vaporesso iTank 2 complete clearomizer kit

Calumette's review: A well thought-out evolution, thanks in particular to the button opening system. The 2 tank glasses with different capacities mean you can modulate the autonomy.

E-liquid not included: Complete your purchase with e-liquid.
For a first purchase, we advise you to test several different liquids, for example at least one Classic flavour and at least one fruity flavour.

Advantages

• Easy to use
• Top-filling with quick-release system
• 8 ml or 5 ml capacity
• Powerful vapor

Kit contents

• 1 Vaporesso iTank 2 clearomizer
• 1 Vaporesso GTi Mesh 0.20 ohm coil
• 1 Vaporesso GTi Mesh 0.40 ohm coil
• 1 straight replacement tank glass 5 ml
• 1 O-rings kit
• 1 French user manual

Specifications

• Length: 5.6 cm
• Diameter : 2.55 cm
• Weight: 83 g
• Capacity: 8 ml or 5 ml depending on the tank glass
• 510 screw thread
• Removable drip tip 510
• Stainless steel and pyrex
• Compatible with Vaporesso GTi coils
• Coils supplied: one Vaporesso GTi 0.20 ohm coil and one Vaporesso GTi 0.40 ohm coil
• Power usage: from 60 to 75 W for the Vaporesso GTi Meshed 0.20 ohm coil and from 50 to 60 W for the Vaporesso GTi Meshed 0.40 ohm coil
• Type of inhalation: direct
• Type of vapor: airy
• vapor: warm to hot
• Percentage of VG in liquid for optimum use: ≥ 70% Vegetable Glycerin
• Level: regular

Use

- Filling your clearomizer:
Press the top cap button to open the clearomizer. Pour your liquid into the slot and then close.

- Changing the coil:
Turn your clearomizer upside down. Unscrew the base of the tank and the coil. Remove the coil and fit a new one, taking care to position it in the grooves. Remember to change your coils every 4 to 5 refills.

- Adjusting the airflow :
Turn the airflow ring to adjust the airflow to your liking. The ring allows you to block the holes through which the air enters the clearomizer to a greater or lesser extent. The more the holes are open, the more the vapor. In short, for a tight draw, leave the air holes almost closed and for a more airy draw, leave the air holes wide open.

Advice

- To prolong the life of your coil and avoid a dry hit on first use, we suggest you prime your coil by placing a few drops of e-liquid on the cotton part. Once your clearomizer is full of e-liquid, inhale (without activating the battery), closing the airflow to thoroughly impregnate your coil.