Eleaf GTL clearomizer

Eleaf GTL clearomizer

Eleaf GTL Clearomizer

The Eleaf GTL clearomizer is halfway between a clearomizer tank and a cartridge. The base of the clearomizer is fairly classic, with an adjustable airflow and a 510 connection pin. Thanks to a magnetic contact, it accommodates a high-capacity 4.5 ml PCTG cartridge.

Teflon cover for filling

The cartridge is filled from the bottom by lifting a Teflon lid. Clean and efficient, it's easy to fill.

Cleaomizer base with airflow ring

The airflow adjustment is located on the base of the clearomizer. It gives you a choice of direct or indirect airflow, thanks to 5 small-diameter holes.

Eleaf GTL coil

The cartridge is used with Eleaf GTL coils, which have the particularity of being able to accept fairly high doses of VG despite their small size (<70%). The flavour reproduction is very present and makes for pleasant vaping all day long.

Range of use of the coils supplied in the Eleaf GTL clearomizer kit:

• Eleaf GTL 0.80 ohm coil for a range of use between 12 and 18 W for an indirect to restrictive direct draw.
• Eleaf GTL 0.40 ohm coil for a range of use between 20 and 30 W for direct draw.

Eleaf GTL complete clearomizer kit

Calumette's review: A simple, effective and highly resistant clearomizer.

Specifications

• 4.5 ml capacity
• Easy to use
• Direct or indirect draw

Kit contents

• 1 Eleaf GTL clearomizer
• 1 Eleaf GTL 0.8 ohm coil
• 1 Eleaf GTL 0.4 ohm coil
• 1 user manual in French

Specifications

• Length: 5.2 cm
• Diameter : 2.5 cm
• Weight : 35.8 g
• Capacity : 4.5 ml
• 510 screw thread
• Non-removable drip tip
• Stainless steel and PCTG
• Compatible with Eleaf GTL coils
• Coils supplied: 1 Eleaf GTL 0.8 ohm coil and 1 Eleaf GTL 0.4 ohm coil
• Power usage: 30 W for the Eleaf GTL 0.4 ohm coil and 18 W for the Eleaf GTL 0.8 ohm coil
• Inhalation type: direct to indirect
• Type of vapor: tight to airy
• vapor: cold to warm
• Percentage of VG in the liquid for optimum use: ≤ 70% Vegetable Glycerin
• Level: beginner to regular

Use

- Filling your clearomizer:
Pull on the drip to remove the cartridge from its base. Lift the Teflon cover underneath and fill your cartridge. Then put your cartridge back in place.

- Changing the coil :
Pull on the drip to remove the cartridge from the pod. Then remove the coil to fit a new one. Put your cartridge back in place.

- Adjusting the airflow :
Turn the airflow ring to adjust the airflow to your liking. For vapor lovers, make sure the airflow is wide open. Conversely, for more flavour, we suggest you close the airflow a little more.

Advice

- We suggest you place a few drops of e-liquid on the cotton part of your coil. Leave the coil to soak for 30 seconds. This will prevent a burnt taste and leaks.