Eleaf GTIO clearomizer

The Eleaf GTiO clearomizer is designed for indirect draw. With a diameter of 19 mm, it fits on compact or small boxes. It's perfect for beginners and lovers of this type of vaping. It has a capacity of 1.8 ml, but its performance can be increased to 3 ml by replacing the initial tank glass with a bulb-sized tank glass.

It is filled from the top by sliding the top cap. Its long drip tip cools the vapor and gives you a tight draw.

The GTiO clearomizer is fitted with a GT 1.2 ohm coil for an operating range of between 7 W and 14 W maximum. It also works with all the coils in Eleaf's GT range. The coil is not screwed on, but clipped into the slot provided.

Power usage of the Eleaf GT coil :

• Eleaf GT 1.2 ohm coil with an operating range of between 7 W and 14 W for indirect inhalation.

Advantages

• Top-filling
• Format

Kit contents

• 1 Eleaf GTiO clearomizer
• 1 GT 1.2 ohm coil
• 1 French user manual

Specifications

• Length: 5.3 cm
• Diameter : 1.9 cm
• Weight : 36 g
• Capacity : 1.8 ml
• 510 screw thread
• 510 Drip tip
• Stainless steel and pyrex
• Compatible with Eleaf GT coils
• Inhalation type: indirect
• vapor type :
• vapor: cold to warm
• Percentage of VG in liquid for optimum use: ≤ 60% Vegetable Glycerin
• Level: beginner

Use

- Filling your Eleaf GTiO clearomizer:
Slide on the top-cap and push it backwards. Insert the e-liquid into the slot provided. Do not fill more than 90% of your tank.

- Changing the Eleaf GTiO coil:
Unscrew the base of the tank to access the coil. Pull out the coil and replace it. Soak your coil in a few drops of e-liquid before vaping. Remember to change your coils every 10 to 15 refills.

- Adjusting the Airflow :
In direct inhalation, for an airy vape, make sure you open the rotation ring. For a tighter draw, close the airflow.

Advice

- We suggest you place a few drops of e-liquid on the cotton part of your coil. Leave the coil to soak for 30 seconds. This will prevent a burnt taste and leaks.